audioman21

For sale is my T3002. Purchased new a few years ago from a local shop. Sat unused most of its life. Functions 100% and cosmeticlly I'd give it 8/10 because it is used with a few marks. 150.00 shipped, obo. Refs..... http://www.stevemeadedesigns.com/board/ind...showtopic=26320

I was prolly gonna get those Infinitys that troy mentioned but damn Stephen you are the man for finding those adapters. I can work with doing some triming work to make those look and sound good.

believe me I want to fiberglass two sets of components somewhere up front bad but the way this car is set up(2001 Malibu) its impossible to accomplish in the kick, door pods, and pillar pods. The design of this car is messed up. BTW troy: do you have the 4x6s in the doors? if so what components and size are you runnin?

With that cleared up can you guys help me redo my interior stage? I ordered an Elemental Designs Nine.4 http://www.edesignaudio.com/product_info.p...;products_id=46 The car is a 2001 Chevy Malibu with 6x9s in the back and 4x6s( 4" with adapter plate) in the front doors. I really wanted to just glass two sets of components in the front doors but the layout of the door is jacked up and kick pods won't work. Basicly I'm just limited to putting something in the factory locations. I was thinking about those Audiopipe 4" tweeters in the front doors and some good quality 6x9s in the back. I just want nice clean, well balanced, and loud mids/highs.

Just curious as to what the difference is with 2-way, 3-way,and 5-way speakers. I know obviously that a 5-way has more tweeters on it. I personally have a set of Kenwood 5-way 6x9's for rear fill but I heard some Infinity 2-way 6x9's they sounded incredible and better quality than the kenwoods. I also saw that higher end companies are mostly all 2-ways, does that mean something like speakers don't need all that 3,4,5 way b.s.?

Yea that was what was wrong with mine, I didn't know until everything was installed and there was no sound.

Yea the fucking weather sucked too but after figuring it out I was a determined sob. Another thing don't know if you put a head unit in yet but again if its like mine you need a 70.00 wire harness like the ones for 2001 and up GM's. I got pissed on that too cause I live a half hour away from Best Buy, and they sold me the wrong harness (figured that out after it was all installed) had to go back and get the right one, well they didn't have the right one so I had to run to Circuit City.

I'd say 18-19ft. just to be safe. Rather have too much than not enough. Good luck running the wire esecially 1/0 guage, if its anything like mine the battery is right by the firewall on the passenger side and there is no holes to use or room to make a whole.

I got the newer style 04, 17ft. should get you back there. They should be aroun the same size.

I have a 2001 Chevy Malibu with a 3.1 v6 that I'm currently working on. I want to do something with the exhaust but don't know anything about exhausts. Currently I've been researching this and so far it seems like a Flowmaster 44 is the way to go, though its hard to tell having to listen to it on a computer rather than in real life. I'm not trying to make this car sound like it has a fart can exhaust or a big v8 under the hood, I just want something that'll give it a real nice mellow tone. If not the Flowmaster 44 what would some of you guys suggest to get this kind of sound? Any suggestions? Mods, I apologize if I didn't put this in the right section.

These are euro led tail lights that will fit an 2002-2005 Ford Explorer. Bought these new from Ebay a few months back but my explorer got totaled before I could put these on so I've never used them. There is a small scuff about 3/4 of a inch long at the very bottom of the passenger side light. Price is 120.00(obo) shipped , Paypal only. Heres a link that tells more about them. http://cgi.ebay.com/ebaymotors/2002-2003-2...sspagenameZWDVW

http://www.stevemeadedesigns.com/board/ind...?showtopic=1005

Everything listed is still available.

ttt

Bump. All prices are shipped.

bump

ttt

16 ft. piece sold.

pm sent

YGPM

Ordered all new wiring so I'm getting rid of the old. Wiring is Knukonceptz Copper Clad Aluminum 1/0 silver and blue, this goes for 1.75 a foot and mine is 1.50 a foot. The blue piece is around 14ft. . One silver is around 16ft. and one is around 8ft.. These measurements are all give or take a few inches becuse it was hard to measure by myself. One fuse holder is Kicker that comes with a 150 anl fuse, a screw that holds the plastic to the holder is missing but the one that remains seems to hold it on just fine. The other one is a knukonceptz fuse holder (doesn't include a fuse). Both holders are for 1/0 gauge wire. Prices: Blue 14ft. 21.00 shipped. Silver 8ft. 12.00 shipped. Kicker fuse holder 15.00 shipped. Knukonceptz fuse holder 20.00 shipped. I will only accept Paypal this way buyer and seller are protected.

I got a Powermaster D1200 I could offer you. Its only like a month and a half old. I bought it new from Jegs. PM me if you interested.

I had a remote start put in at a local shop and when the cars in drive but I'm sitting with my foot on the brake then horn will randomly honk. It mostly does it at drive throughs. The shop can't figure out whats wrong with it but its definately related to it, the brains been replaced like 4-5 times.

Mine is doing it too. I was gonna make a post yesterday but I thought it was just my computer.

I have two dc level four with level five coils and new woven tinsels. freshly reconed two weeks ago, maybe we can work something out.