Jump to content

frkkevin

Members
  • Posts

    22
  • Joined

  • Last visited

Everything posted by frkkevin

  1. interested in an SX motor you could recone to w/e?
  2. I've got a good RE SX 15" motor you could get reconed to w/e .... its been reconed but something is wrong with it.. plays but has a knocking and the weird thing is there are no scrapes.. its free on that notes its gotta be a spider that failled .. DVC 1 ohm .. kevlar cone but i'd trade you that + something else... i have two zapco 2 channels and a clarion 4/3/2
  3. Wanna get rid of it? I've got some nice stuff laying around..
  4. pics of the Zapcos powered.. http://www.putfile.com/frkkevin/images/86999 didn't get a chance to do the clarion.. i know it works but did not have time to dig it out of storage
  5. Yea.. it scans for stuff like that.. you can program it for certain frequencies near your area for specifics though and the list can be found online with ease... but heh.. if your interested let me know.. it retails for $100+
  6. Pictures Clarion 4/3/2 APA4162 - http://www.putfile.com/frkkevin/images/83415 Zapco Amps - http://www.putfile.com/frkkevin/images/84589 RE/DD - http://www.putfile.com/frkkevin/images/84771 $65 shipped Clarion 4/3/2 APA4162 Maximum Power Output 260w (65wx4) Continous Average Power Output 160w (40x4 into 4ohms 20Hz-20kHz @ 0.08% THD Typical 2-ohm Stereo 65wx4 @ 0.8% THD Typical Bridged Power 120wx2 @ 0.8% THD Bass Exterender Control 0-12dB Adjustable 4-channel 50hz-200hz, 12dB/oct. High/Low Pass Crossover Mixed-Mode Operation Bridgable 4-, 3, or 2-Channel Operation Pulse-Width Regulated MOSFET Power Supply Pair of Zapcos - *SOLD* $130 shipped Zapco MODEL Z100S2 2 x 50w rms Specs: Power/Mode 130 watts @ 4 ohm Stereo .02% THD 190 watts @ 2 ohm Stereo .04% THD 190 watts @ 4 ohm Mono .04% THD Frequency Response 20-20kHz S/N Ratio 110dB T.I.M. .002% Seperation 65dB Slew rate 40 V/uS Damping Factor 300 @ 4 ohms Input Sensitivity .25-2.5 volts Power Requirements 22amps, max, @ 2 ohm Fuse Internal, 30A Minimum Load 2ohms Nominal Stereo, 4 ohms nominal mono Idle Current .8A Dimensions 10.25"x6"x2.25" $160 shipped Zapco MODEL Z150S2 2 x 75w rms Specs: 160 watts @ 4 ohm Stereo .02% THD 250 watts @ 2 ohm Stereo .005% THD 250 watts @ 4 ohm Mono .04% THD Frequency Response 20-20kHz S/N Ratio 110dB T.I.M. .002% Seperation 65dB Slew rate 50 V/uS Damping Factor 300 @ 4 ohms Input Sensitivity .25-2.5 volts Power Requirements 22amps, max, @ 2 ohm Fuse Internal, 20A Minimum Load 2ohms Nominal Stereo, 4 ohms nominal mono Idle Current .85A Dimensions 11.625"x6"x2.25"
  7. i'd trade you a handheld police scanner .. 1000 channel duel trunking
  8. Very nice amp.. be nicer if someone could send me the cash for it so I can get my other SX 15 ... I've got three amps and only 1 sub to power.. come on guys!
  9. .. make me some offers. first one who can send me 275+ shipping or 300 shipped and you can have it
  10. Shooting for a 150.. with the single SX 15" now I'm doing 146.3 @ 42hz.. figure double the power.. double the cone higher and tune 10hz higher.. i should meet my mark.. But I need the money for the sub.. I have everything else
  11. actually... $300+ shipping .. and it is a very well built amp.. but not the 'king of amps' .. better build than the eD Nine.1 If it is not sold by tomorrow this time I'll sell it local to a co-worker.. was just trying to get all the money up front rather than two payments.. need the money for another RE SX 15"
  12. change the @ to AT in your email.. there are bots on this forum
  13. More pix! Can't really see the fuses but there are 4x35A
  14. I can't go $200 .. sorry .. I can sell it local to a friend and get $200 this weekend and the rest 2 weeks after. But I need the money asap because I'm trying to buy another RE SX 15". To answer the question about weight.. using a regular scale it was 13.5lbs so given it is probably only 2% accurate it would be right around there. And all but the 1st picture was from ampguts but the amp is exactly the same and I will post pictures if asked now that I got some new batteries for my cam .. sooo..how about... $300+ shipping
  15. Recoil RED1000.1 1000rms @ 1 ohm * 12.6volts Heres two quick videos of the amp powering my SX.. nothing great.. In the second vid the amp can be seen on the left mounted on the passenger side wheel well http://media.putfile.com/Window-V2-Flexing http://media.putfile.com/Inside-Flexing This amp was used for 4mos to power a single RE SX 15" and at local shows pulled a consitant 145.3dB on a TL @ 42hz. Only reason I am selling it was because I needed more power and no longer have use for this amp. Only flaws are small scratches where the screws go through to mound the amp. Trades considered: RE SX 15" 6.5" Component set Component Amp Email me for any other information or questions: frkkevinATyahoo.com The amp... There images after the first are not the actual amp due to deal batteries in a camera but I will post more pics upon request. Big thanks to ampguts for the pictures.
×
×
  • Create New...