I'll take a shot right now.
Please i would appreciate it.
You're on your own for where to place the ports man. Without seeing the application I dont have a clue.
The 6" aeroports require a 8.25" cutout for the flair. If you want to tune to 32 hz, you need 15" of length.
2 6" ports gets you a port area of 8.1 inches^2 per cubic foot.
I do not know the displacement of the subs, so I guessed .4 for both together. Also didnt know the displacement of the ports, so I guessed .15 cu ft.
Specs:
After all displacement, ~ 7 cubic feet, or 3.5 cubes per sub.
Pics:
Cut sheets:
Sides: 23.75 x 15.5 (qty 2)
Top and bottom: 24.5 x 38 (qty 2)
Front / Back / Baffle: 16.25 x 38
For the front cuts:
Front: Circles were 9.5" in, centered on the midline
Baffle: Also 9.5" centered on midline, but .75" offset for 3/8" routing
Audioque suggests 11.375 diameter cut outs.
You will have to decide what to do with the Aeroports.
I appreciate the help but it was different than I wanted. I like the design, except I wanted the box smaller and tuned to 34hz. Anyone else interested in taking a stab at it? I would appreciate it for sure