Jump to content

Sheena

Members
  • Posts

    1853
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by Sheena

  1. pretty much whatever your happy with. whatever your build quality standards is. if the cardboard is a little too small after cutting, cut the mdf piece a little larger, then route/jigsaw it a little at a time until its a snug fit. then you can add aesthetics to it. (carpet, paint, whatever have you.)
  2. trial and error cardboarding, im sure no one gets it on their first few tries lol
  3. how did it not work? lol remove the wood from your trunk and set it on a work bench. take the cardboard and place it ontop of the piece, then run a knife, or sharp instrument along the edges. if done correctly this will give you an exact cardboard replica of what you need to reproduce on a sheet of mdf. 1/2" or 3/4" is really your call on the mdf. put the cardboard ontop of the mdf sheet and sharpie around the edges, then either use a router to cut the shape out, or a jigsaw.
  4. mdf + carpet + super 77 = finished product.
  5. since im in the mood of taking pics with my ipad 3..
  6. papa-wheelie... can anyone guess where i got that reference from?
  7. its not what was replaced... but whats missing/unhooked/installed improperly.
  8. good luck.. i hope when you get there that its actually in good shape and not some guy trying to fuck you and your family over.
  9. gas prices? surprised everyone just overlooked that one car electrical people
  10. give this a read http://autos.msn.com/research/userreviews/reviewlist.aspx?modelid=846 help answer some of your questions while you wait for answers here. i will warn you though.. if you go looking for issues with ANYTHING in the world, you will find them.. its really vehicle dependent, so you'd really have to give this truck a once over before making a move.
  11. idk, i'd want to do a full refresh on a used vehicle, thats just me. you'd have to see for yourself if its shifting smoothly. but i'd redo everything just in case.
  12. well if you cant fix the A/C by yourself, hundreds of dollars right there in labor. possibly could need oil changed tranny flushed and oil changed oil filters/air filter. really you'd have to inspect it with a fine tooth comb before purchasing and really seeing what the owner is hiding.
  13. at full tilt whats your voltage drop to?
  14. Brz 2400 all day. Hfi series is crap
  15. was just letting him know my situation so hes not all freaking out. but if the dd1 says no clip at 70%, then thats the word of god. if it sounds nice to you, d/w.. but theres nothing wrong with anything in your setup. 70% is just your area with the -10 tone, max unclipped volume on the hu, max unclipped pre out voltage.
  16. 2v preouts would warrant a higher setting on your amp.. i have 4v preouts and my SW level is 5/15 my gain knob sits at around 60%? actually let me run outside and check where the arrow is pointing.. its pointing at the L in bass controL. but my knob goes past the "max" arrow, all the way up it points all the way down.
  17. what deck, whats your pre out voltage, whats your SW level on your deck? 0/10? 5/10? etc
  18. try XS power or Kinetik batteries. stinger batts too. all well known brands ran on this site
  19. like a perfect match. wire down to 1 ohm and you'd be set. whats your electrical look like? probably need an upgraded batt or alt. big 3 done?
  20. i would bump that amp budget up a little. here are some nice amps that do rated: AQ you can of course get budget amps, like mb quart/hifonics. (still do rated.. but at 14.4 volts instead of a much more realistic 13.5, or 12.8 volts) just keep in mind your electrical system. stock electrical in a vehicle is generally good up to about 1k rms. (remember.. GENERALLY)
×
×
  • Create New...