Amart88

Yep ok, thank you all for clearing this up. Also, i consider this a big part of my 'research' as I have faith in people on here. I did read the manual but not that part i guess.. Thanks again

So they say strappable at 2 ohm. Does this mean that each woofer will see 1 ohm? also dont want to have the amp running below reccomended impedence if i can help it

because they are only stable at 2 ohm when strapped. I want to run them each at one ohm I dont want a 3500 watt amp putting out 2000 watts. and its more straight forward to wire when they are seperate? I hate having 2 wires crammed into one terminal. I would like them strapped, but i though I could just strap them so each one was paralell to each woofer but I guess not. I don't see why they can't make amps that allow you controll both without strapping. I'm lost

Ok. well that answers that. they only make around 1975 watts each @ 2 ohm. I would want more than that so I guess i'll run them seperate. anf figure out this gain matching deal. Also anyone know if you can use one remot eknob with a splitter with these amps?

Well, I will be hooking up my new BC3500's when the weather gets nice again. I am running 2 Fi N2 15's (Dual 2) and want to know if I should strap the crescendos or have them seperate? I was planning on running each woofer paralell to each amp at one ohm with 2 positive and 2 negitive runs to each woofer but if I strap them it would change everything? If I dont strap them, what is the best way to gain match? I don't have a cc-1 only a dd-1. Thanks

a21bravo driving around? lol

I was always told Get copper... copper copper copper. So. I just use tinned copper lugs now.

lol wow.

If I rip a CD with wmp do I lose quality?

MP3 cloud is only in the USA. I cant figure out how to download the album off amazon.ca it only lets me order the CD's? http://www.amazon.ca/Pt1-3-Block-Brochure-Welcome-E-40/dp/B0079411DU/ref=sr_1_1?s=music&ie=UTF8&qid=1334844194&sr=1-1

Ok, well I was wanting to get E40's new block brochure album. Unsuprisingly it's not available on itunes in Canada...... So I was wondering what other trusted sites I can buy music from and download right to my computer. High quality. Any Ideas, prefernces? thanks. I do not feel like buying the cd's and waiting and going through all that ripping BS.

I remembered seeing a product a while back called Chassis saver, it was on an episode of "trucks". You can use it as an undercoat paint and it also stops rust permenatly. Anyone ever use this product? They say its chip proof. I was thinking of getting a can and painting the underbody of my car. Get alot of moisture, rust and salt here. Vehicles like to fall apart from rust very fast here :S I fugured it would be good to do while theres not too much rust yet. Heres a link to it. What do you guys think? http://www.magnetpai...m/underbody.asp

Yeah that makes sense. Less resistance that way its direct. But would it hur to ground my batts in the trunk also? I like to over do things If you run Isolated ground runs, theres no point in running a separate (non isolated) ground to the body of the car. Yes, true but it never hurts to have more than not enough. Plus its sort of a "failsafe" it will take the path of least resistance anyways

...............................so even tinned they will still corrode on aluminum? Might just get some copper bars instead then. and doesn't dieelectric grease prevent conduction? like electrical tape? thought i heard that before, could be mistaken.

I did order 40 tinned copper lugs. Now if they are tinned, can they be used on an aluminum buss bar? i know aluminum don't like copper.

"exposed" as in outside of the car?

So just stick with the non tinned ones? They re still in my cart lol. made some dumb mistakes in the past so now I overthink everything. just concerned that the bare copper will oxidize or get all shitty on me after a while but I could be mis-inforemed

Ok thanks. I have 40 in my cart but for 6$ more should i get the tinned ones?

What about these? littl emore expensive but... http://www.amazon.com/PARTSMART-SMR35656-Flared-Copper-Lug/dp/B004MF5ZMM/ref=sr_1_3?m=A2SUCQG1F31RUU&s=automotive&ie=UTF8&qid=1334588913&sr=1-3

What is the 2/0 1/2 inch and 1/4 inch? is that the bolt hole size? which size is most common? 1/2 inch seems pretty big

Yea i use knu and i use 1/0 lugs i get mine from ebay they are$ 26 for 20. The person that sells them iscall ed windycity You got a link?

Well the knu is over sized. I have a few 2/0 lugs here I borrowed from a freinds work and they are 2/0 they fit the wire sung. I don't have anywhere here to buy them, thy are like 6-12 dollars each here. :S

Thanks, just wanted to be sure

Im getting some copper lugs on ebay and am down to 2 choices. Just want to make sure of what I'm getting, They are for Knukonceptz Fleks OFC 1/0 so I should get 2/0 lugs correct? They will be hydraulic crimped. Which ones do you think I should go with? better deal? Thanks Choice#1 http://www.ebay.com/itm/290290578119?item=290290578119&viewitem=&vxp=mtr Choice #2 http://www.ebay.ca/itm/20-Copper-Battery-Lugs-2-0-3-8-hole-NOS-/251007759370?pt=LH_DefaultDomain_0&hash=item3a713a740a

Copper or Aluminum? pro cons?