do you have all tools required to make box? and do you have knowledge to build a box out of wood? then you can make a custom box. it takes a few to get good at them. well build time wise at least. but port lentgh is only tricky par when figuring out cuts. measure down center of port
sounds like cheapo subs maybe? or not real terminators? what i mean by that is motor or coil assembly isnt actually mtx? I know here in Michigan there are a couple knock of wholesale places that you can buy specifically terminators for ridiculusly low prices and other subs and you never know what your actually getting. but glad to hear its working now
I did not upgrade the chasis to engine. I didn't have time yesterday. I figured the mechman would stop all the problems. But it didn't. I think the draw on te battery for the car and the system is more then the battery can keep up with.
if you don't have every part of the big 3 which means one of those parts is your stock 4 gauge or smaller usually stock 6 or 8 gauge wire then your H/O alt will do you no good. That stock wire can not handle the amount of current that alt puts out at idle (160 A) let alone at its max output. thus your amp with 4 gauge wire or 0 if you up grade will do no good. it will help a little but a chain is only as strong as its weakest link. thus your engine block to chasis or frame as people call it may be the only porblem you have. just install that 3 ft of wire and watch the results. i hope that solves it. as far as running 0 gauge to your amp you can buy reducers from 0 to 4 gauge or you can cut 0 gauge down to fit into amp.
i didn't see anywhere about you doing all of the big 3. you did alt to bat and bat to ground but did you do the alt chasis or engine to ground in 0 gauge as well? that could be the problem too. with that H/O alt you deff should not have electrical issues especially with that 1.2k
my call is loading issues, i had same problems with one of my boxes, it sucked, one got hot while other was fine. but i guess you can always double check wiring
ok perfect thanks. people are freking out on me running it on a stock alt with amp at .5 ohm. it doesnt get hot nor does my voltage drop below 12.8 i just want to get a lil extra juice out of it by running the extra batt
i know your fucking with me. did i not make my reply sarcastic enough?
but yea i didnt buy anyhting yet. just considering adding an xs D5100 or a kinetik HC1400. im trying to cram in a small space. but wouldd appreciate advice. also i don't think a new alt is in future. funds and car might be sold soon. id like to go with kinetik bat for that reason if they arent too bad
thanks for the explanation. that is all im really trying to do is help the situation. idk if im even gunna have this car for long. i just wanted to know if adding a kinetick HC1400 or XS D5100 will keep my voltage above/at 13 then id be happy
yea you should be fine. personally id stick closer to 7 but not much less. 7 sounds good. it will be an efficinet box. just make sure oyu know your songs and possibly have subsonic on