DeepBassAddiction

exo by SH anything off the new soundstream bass heads unite vol 1

just check ebay. theres cheeeeeap 2chs and if its a ugly amp just hide it

I'm just getting up. But I believe both ur woofers need 2.6cubes apeice. So at least 4cubes net. Do u want both ports on the same side or 1 on each

Well recently iv been playing with Torres and SketchUp to make a enclosure for my feature build including 2 DC AUDIO LVL 3 15's, and a Soundstream tx1.2000D. It will be going in the back of a suv. (My car got sent to the junk yard. *engine blew* Gonna get a 2-4 door suv.) well take a look and let me know what you guys think... Correct any mistakes i might of made... (if any) Box = H 20" x W 40" x D 22" Port = H 18.5" x W 4" x L 19.4", #CPW = 2 Hz = 32.03 Cubes = 6.82 Front 2 panels are Plexi, just thought it would look Shhhhweeeeeeet...

dose that say 5" aero?... ill do it it will take about 30 mins to a hour can i ask why a wedge? can i just set up a box for you it will be alot eaiser and why 15.5 for height?

ohm load on the 8s and how much for 2? x2

Yeah I got that, what if theyre flared tho? and what do i put exactly.. # of ports say 2. so do i fill out the height width and diameter? and common port walls = 1 no common wall is 0 if u put # of ports at 2 then ull need 2 ports no you do not fill in hight width and diameter... you fill i the # of ports, diameter and leangth.. if you want tell me your Subs, Space, port diameter desired ( 4, 6 or, 8 ) and ill build you a box in sketch up and post you a vid on my you tube channel...

AAAAH HHHHHHHHHHHHYELLOW VAAANILLA FAYCE! IT IS A ME DeepBassAddiction! rofl sup billy billy!

what you are saying is you want to put a switch onto the power wire of some speakers out side your car??? i hope they are marine speakers or waterproof (rain... ect... ect...) i mean its totally doable.... but here is my thought... if you have lets say 2 6.5s on 1 switch i believe that would change the ohm's load... you might need a switch for each speaker... or maybe if you put the switch on the ground... but idk... lets see what the next person says b4 you take my advice lol

do you want a real pic with cut sheets?

i believe i might of got a chubby from that vid

i really hope i win these bad boys. i been using 2 12" sonys for a loooooooooong time. now that my cars shot i cant even afford the 2 15" lvl 3s i was about to buy...

Can you please change mine to DeepBassAddiction so it will match my You Tube channel, the engine in my cutlass blew and i no longer have it so CutlassTakenDumps really docent work...

Im Kory, iv been into car audio for awhile now fond you threw steve's youtube channel which i found threw exo's channel

OK THANKS. one last question If it is 2600 watts at .5ohms is that each channel if so can I bridge it and make it 1ohm The two terminals all go to the same place. But one thing with these amps, be careful with your pre-out voltage. These amps don't like ANYTHING over 5 volts. So if you have a line driver I would go about tuning very carefully, and with a little room for play for those songs with different recording levels. Overall, great amp, little footprint. Clamped mine doing 1000W at 3.8ohm the man speaks the truth, dont worrie i was flabbergasted when i opened my tx1.2000d and seen double terminals. it just makes things eaiser when wireing. even my tx1.2000d is redonk, i have it hooked up to 2 12" sonys at 1% vol. 0 boost, and about half knob on my bx-15 and it takes poops in my trunk. take a look at it on my youtube below

already thinking about box ideas and aero porting... think a px1.2000d would eat these?

X2 X3

well after much aggravation i took the amp apart... 9 resistors weren't even fully soldered to the board... zzzzs and to boot the POWER and PROTECTION led's where switched...

na he should get hulk hogans mini wrestlers to do security. then he can always keep a spare in his port when he gose to competitions... lol

I fixed my tx1.2000d my self but she sent me a px1.2000d brand new b4 I fixed it. IV since been trying to contact the lady (Liz I think she said her name was) to ship her back the px1.2000d and get my $250 deposit back(oh I failed to mention the end caps were broken in the box on the px1) she told me she spent a extra $100 on the px1. I emailed her back and asked if id still get my deposit back and now she wouldn't return my emails... will not be buying from them again..

im so about to cry... i finaly found this thread 2 DAYS after my motor blew in my car... no instead of buying the DC 15s iv wanted and building my first box, im searching for used cars and might have to sell some of my equipment... saddest sad face, that ever sad faced...

Ill state the obvious... ur putting them both in the same box... there diff wooferes with diff displacements. N they call for dic cubic ft boxes... build a ported box for each at its optimal cubes n see what happens

I have to wait till my room mate gets back from Florida so I can use her lap top... till then I got my android

The RE calc is off quite a bit by what I'm told Here's the torres calculator man if you can't find it. Torres Calculator Tyvm. One more question. How far off a box wall should a aero port be? Or dose it not matter?