Jump to content

jrouter76

Members
  • Content Count

    20
  • Joined

  • Last visited

Community Reputation

0 Neutral

About jrouter76

  • Rank
    120db
  1. I know its been awhile but how good and reliable was that MB Quart Q4.150 4 ch.amp I bought one used waiting for it to get here,you got anymore amp gut pics?

  2. I would also run DBAN to erase any corupted files on the HDD you really want a fresh slate to work with it will take awhile depending on how large your HDD is...and once you have done the DBAN and yous till have problems installing the OS,your HDD is more then likely bad.
  3. That is true,I had a Rockford Amp(the old ugly pewter-colored ones shaped like a trapazoid) and I was hooking it up and like you said a strand of the Neg wire touch the POS wire and it blow the Amp,this why I don`t use RF amps too damn sensitve- voltage -wise,now if ot had been an PPI amp it would have not have been a problem those amp would take a dead short and still would have functioned.
  4. Hey BeALLsTaR13 are you using an aero port? ? You can see the slot port ..... ^^^what he said lol lol it just pops back in yeah im surprised their hitting lows like that not sealed off.. im just too lazy to seal it atm lol well its fairly hard to compare a "600" watt sub to a "1500" watt sub, especially since the z12s like smaller boxes than the sa12s these, to the ear are by far louder (havnt metered yet) and anything from 29-38hz it just kills, especially in that 31-34hz range Yes I see the Slot Port Now,was too busy Listening What are the Dims of that Box? and what d
  5. Hey BeALLsTaR13 are you using an aero port? what size and tuning Freq.? sound real low bass?
  6. Correct. I had about 8" of external port in my last setup so instead of having just plastic tube hanging out I built a little "beauty box" to try something new and make it look a little better imo. Without external port, there would not have been enough clearance. Worked well. btw Cashdollar nice looking like that how does the aero port sound and what is it tuned too how much port area do you have ? sorry for all the questions
  7. Correct. I had about 8" of external port in my last setup so instead of having just plastic tube hanging out I built a little "beauty box" to try something new and make it look a little better imo. Without external port, there would not have been enough clearance. Worked well. how did you calculate port displacement when part of the port is not inside the box?
  8. Hmmmm something to think about thanks Fish Chris.....I guess you could have your port sticking out the front baffle where your subs are mount also.
  9. can you actually use a elbow on an aero port? I was informed that it would`nt work
  10. im kinda looking for somethin with a lil more bottom end. what do the Fi BL compare to? I mean would it compare to a SA Z v2? or a SI Mag v3 in terms of low end and output in a ported box off of 2500 watts?
  11. Hey guys I`m new here....I need some information, I`m in the processof designing a common chamber for 2-12 xls with a slot port.Now what would the internal measurements be in cu.ft.be INCLUDING the PORT and spkr displacement? and how long would my port need to be tuned to 32hz for 68sq in port ?
×
×
  • Create New...