brent379

this seems like guaranteed blown woofers. granite they are very well built subs... 5k @ 1ohm is already just over double the rated rms... so a 5k @ half is asking for trouble. hope your voltage will stay in the 14s...and that you have a dd1 to set EVERYTHING cuz clipping one single time could easily blow your 15s. and smaller enclosure isnt necessarily the answer when throwing that much power over whats rated. good luck!

wow. that's impressive. ok I get it now. you really only need 1 of these lol that's bad ass.

what is the benefit of this batt over a regular agm? sorry for the noob question, im trying to learn more about batts.

You should be able to get it lol but thanks man!

Lol to be truthful, I had no idea what number it would put up, I was just hoping for 140 lol And honestly no! The amp actually does damn good, but I got pretty decent electrical To handle It. I'm right at the point to where at idle voltage will drop to high 11s, but if I hold 2000 rpms it don't drop under 13.

Thank you sir!

Ya I have read that people have luck with these in 1.5-1.6 per. And I'm building this new enclosure to where I can move the back baffle in to reduce internal volume. It will be a pain to do but I will be able to do it. I'm just trying different things and seeing what happens. Is easier to start big and shrink from there then it is to start small and build bigger

Damn it I meant louder. And if I was keeping the same box volume I wouldn't expect much of a difference. But I'm gaining about 2 cubic feet of net volume. Which could be either good or bad. Won't know until it's done and I get it metered. These numbers were with a box that was 2.7 cubes net, should have been tuned at about 35. Hit the highs VERY solid, but couldn't do shit under maybe 33. But with the rebuild, I'll be between 4.7-5 cubes net. I'll have a set of aeros tuned low, like 30, just for daily, but they will be removable so I can play with different port areas and tuning on the meter. Huge change in enclosures lol could go either way.

Thank you! Hopefully it's a little lower once this rebuild is done!

And thank you Justin!

It was mine. I tried flipping it around before I rebuilt it and it was quite a bit louder. So I rebuilt it and left it facing forward. So now even I rebuild it again, it will be sealed off facing forward. And I'll have to build everything in the trunk. Will be interesting lol

Thanks rusty!

thank you! cant wait to rebuild it and see how it does.

oops. is it possible to get this moved to the spl section?

pretty happy with this wont lie. 146 @ 46hz at the passenger headrest, driver door open. I guess this It was metered mecca style. ive never seen a meter before this, and don't know anything about competing or anything, I just know what the numbers mean lol and this is without the trunk being sealed off, woofers and port just firing forward. I will be rebuilding it soon 2 lvl 3 m2 12's aq2200 @ .46 in the trunk of a 2013 Subaru wrx sedan. just had to share