SlamminBeats

I did 3 coats, cant see any black. Dont do them on a hot day outside! The key to gloss is to wet sand the shit out of them, then use a buffer tool to get the best results. Its very hard to gloss them up by hand.

Yes def wall them, no need to over power CVRs, every time i overpowered them, they blew. Use a DD-1 though to set your gains, and im sure you can give them a little more than rated, but def not more than 750 rms per sub.

Haters gon' hate. i have the same subs as you. They're great subs. It all preference when it comes to brands.

That would be sick if you did a 160 with that setup. Even though your setup is not 100% intended for SPL. I believe that it would just be cool to see someone do a 160 without a wall.

and if you heard anything else you may not be so quick to praise them. Are they complete trash? not compelte but i definitely wouldnt spend 800 bucks on a xxxs. believe me ive heard plenty. RE SXX's are good plain and simple. Trying to not to be a fan boy, but i did my research prior to buying these, and you get what you pay for (usually), and in this case it was worth it.

you really want to go down that route?

yea i can imagine they were much better back in the day.

I have vids of 2 RE SXX 15s, on only a t1500cp. you might not be so quick to put down RE.

do they have a t1000-4bd cp? if so, get that

it will do the job. rockford amps tend to do their job and then some.

try condensing your question down a bit too

classic example of why audioshops dont know shit

so fake dude...

Slam

id prefer not to do it myself, i feel like the shops by me sell these so ill look in to that.

Alright thanks guys, what would be a reasonable price to expect to pay for installation??

i see. Whats a good alarm then for the money? viper?? and which one??

So i know nothing about alarm systems, but i want to know if there's an alarm that triggers upon glass shattering if not, then whats a good alarm system for around $200??

Well for subs, don't buy anything your local shop sells. Look into Skar, Sundown, RE, FI, DC or any other reliable online brand.

xs prob, regardless of your power.

62 is clip free... so volume 0-62 is safe you want the most amount off preout voltage so you turn the gain on amp up the least, this results in the least amount of thd i see i see, but the bass amp read distortion at 57, everything was flat, my question is, you know the sub level how it goes from -24 to +6, i had it at 0. that to me seems to be almost all the way up... should it have been at 0 or at like -24?? how is that possible? with gain all the way down play track 1+2 thru amp speaker terminals til headunit clips, which will be volume 62. then go to track 3/4 or 5/6, volume at 62, don't move test probes and turn up gain til it distorts. which means the bass amp cannot distort at 57, its impossible because when you turned the gain up the headunit volume should have been 62. sub level should be at 0 yea i had sub level at 0 when testing HU clipping, it went on at 57. So say i tune it at 62, would you recommend turning it up to 62?

62 is clip free... so volume 0-62 is safe you want the most amount off preout voltage so you turn the gain on amp up the least, this results in the least amount of thd i see i see, but the bass amp read distortion at 57, everything was flat, my question is, you know the sub level how it goes from -24 to +6, i had it at 0. that to me seems to be almost all the way up... should it have been at 0 or at like -24??

so then 56 is safer then? right?

anyone wanna check my first post to make sure i did it right?? Thanks!