SlamminBeats

yea im gonna at the least rebuild this box if i dont upgrade. what should i tune it too? cuz its supposedly at 36hz right now. im also gonna fiberglass the inside too.

ebay sucks for alts, already checked, might have to man up and drop 4 hundo.

exactly i had a shop build it, .75 baffle,, ripped up,, they claim its normal for these subs to use that baffle..lol amateurs.

yea im loooking into alternators now,, any ideas for one thats 300-350 shipped?

the 15s are good, just bored of them, more cone area from 12s would be louder for sure, not to mention a box that is braced, when i build it

bump

Thinking about doing 4 Skar 12's, 2 cubes a piece, 8 cubic ft box. What should i tune it too though? Currently have 2 RE SXX 15s on a T1500cp. The skars would prob be on 2 T1500's

Anyone know a h/o alt for 3-350? shipped at least 200 amp??

Where on your engine is the alternator located? If on top then it may be easy enough to do yourself. Spend the "installation money" on the alt and do your own install. car needs to be on a lift to get to the alternator, which i dont have

dont mind if i jump in i need an alt too it seems but im not looking to spend more than 300 + maybe 100 more for installation. not sure i would know how to switch it out.. any ideas? i have a 2001 sabb 93.

how does kinetik compare to like optima?

Would you do 3/4 subs in a custom box for an adjusted price??

think im gonna do subs up port back. I just need to ditch these RE SXX's there way better subs out there. Thinking DC level 4s or XL's

if your subs need more power than you have, don't you make the box slightly bigger?, also when a sub need 4 cubes, thats after displacement and port displacement right? so in reality the actual box itself may be 5??

yea thats true, whats the price rang for an alt? any way i can get one for 300? or no chance on that?

my new box is gonna be double baffle, prob no bracing, but does the common walls thing affect sound? its for music

why would i need a new alternator? cant i just add batteries?

what type of electrical would i need to run 2 T1500s? have a kinetik 600 and 1800 2/3 big 3 done (going to finish the third) 0 gauge going to fix my ground in rear bank to 0 gauge what else might i need?

didnt expect them skars to slam like this.. nice

i see, so that picture has 2 port lengths then correct?

i mean i understand that, so like does that exclude the mdf size?

What does port length mean?

right on. Which way to i run the bracing rod in the box? up and down or left to right?

should it be subs up port up? also can you add bracing to a box if its alrdy built? Can i just rip off the front baffle?

im gonna fix my ground i think