AKT6190

T1500s do around 1800rms ea+ if that is true then yes i can power them but i thought they only put out about 1700?

Yah i know and height- 31 maybe 32in width- 41 maybe 42in depth- about 24in my current wall is height- 31in width- 38in depth- 23in and its 13.4 cubic feet

and i only have 2 t1500s for 6 12s i would need more power! they 600 rms a piece 6 x 600 = 3600 and i want to put more power to them with for subs each will get about 750 a piece which i think will be great!

its a 2000 toyota solora i doubt i can get 2 more twelves but i might be possible edit: i just tryed with a 12 i had layin around and i can fit 6 12s! but now i need 2 more 12s and another t1500! and ill have to further upgrade my doors to keep up!

what do you mean symmetry and 3's and thanks i like that, will port on top have more of a chance of a hairtrick. a lot of people said port on bottom so you dont lose all the sound pressure and i didnt understand.

haha loud as in loud!

yes sir.! 1 ohm per amp pullin about 1700 per amp i got a new interstate megatron plus 2: 1000 crankin amps under the hood. and a smaller interstate in the back and will probably do the big three but thats it

2 on each side and port in the middle. ok but will that sound pretty good? i really want a hair trick on this build will this help get one? and i have 2 t1500's 2 subs per amp sound good?

I have 4 SA 12's and i want to wall them but what would be the loudest way as in.. 2 on one side port the 2 on the other or what? also i know these subs only get 600 rms but how much do you think i can feed them without blowing.? Thanks

holy sh*t haha is that a xxx 18?

mine are rated for 1000 but can handle a bit more. but what do you mean drop it down at that power?

alright thanxs to everyone.!

7 Cubic feet each? isnt that a little to much? im not an expert on boxes but kicker says 12 cubic feet total for 2? just confused. but thanxs and what do you mean by full tilt? i got 2 t1500's one for each. wired to 2ohms so like 1600 to each sub.

Inverting the subs.? What benefit does it have? louder? deeper? im confused help me out

Ok so i have 2 L7 15's i want to know if it would be ok to build a wall or just a box, i have plenty of space for either i want it to get loud on the lows. real low!! another question what kind of port do i need to get real low aeroport or regular etc. and what kind of box as in like ported 4th order ect? help me out please kicker recommends not going over 12 cu ft for the 2 just sayin

I need some help on how big to make my box. If I can i would like to build a wall. if it would sound good. I can take out the whole back seat of 2000 toyota solora. not sure about the year. I have 2 kicker L7 15's and 2 Rockford T1500.1s and 2 0 gauge amp kits.

is this for spl? or daily to like impress friends?

ill look into those brands thanks and im not very knowledgeable on reconing i would rather buy them in tacked lol

500 to 650 maybe a little more

oh and nobody answered my question what subs should i try to get for those t1500"s 1 amp per sub just to be clear

ok thanks ill think about it and yah i no about the 1500s i was going to turn the gains down

no offense but particle board is horrible. plywood would be the best. he was joking, guess that went right over your head. edit: and plywood isnt the best, BIRCH ply is what you mean, and they all have trade offs, there is no "best". oh sorry didnt even think of that. and yah birch. didnt really mean the BEST just what i like like to use

subs on passenger side as far as you can get them and port on driver side is best way to go and yes the L port is the best way to go because when you have 2 of the same subs in same enclosure its like one big sub if everything is done right.

ok well what subs do you all recomend and why not the kickers? just asking

no offense but particle board is horrible. plywood would be the best.