tacomabanga1986

tacomas ftmfw!! cool setup man, sounds good to, my system in is my sig if u wanna check out my tacoma and is that box sealed or ported?

haha, i bet that hurt like a son of a bitch but looks cool as hell, what is it susposto be? and just wondering but how much does a tat like that cost? i wanna get one with my sons name on it with some kinda mechanical lookin ish, like gears n what knot some some kinda tribal shit, but urs look cool as hell man, u gunna keep it black or put color with it?

get a bass blocker for around 4,500k hz 4ohm and u'll be good, ive ran a shit load of power to tweets befor with no xover n they worked fine, but they will blow without a xover at 200+ htz, but ued be supprized how many CLEAN watts u can run to a tweet with right xover freq without it blowing, i ran 200w to some 50w cheap tweets n they jamed like hell but take into mind, alot of power to a speaker that has little to no moveing mass will get really hot n cause thermal damage rather than mechanical heres a vid from youtube off a tweeter with a 50hz sine wave playing and a vid of what tweets will take to blow name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src=" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>"> name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src=" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>" type="application/x-shockwave-flash" width="425" height="350">

well it depends on what kinda pyle, the older pyle driver amps n subs was the shit back then kinda like legacy n what knot, but we've came a long way from then and these are pro audio, pritty much cant screw up pro audio that bad, almost all drivers in pro audio, tweets n some mids n subs can be reconed with bolt ins, im still amazed at the bass output of a pro audio woofer with only 1.5mm xmax ina ported box, ied like to see a pro audio build tho, but ive had a set of bullet tweets n without a mid it hurt like hell, sounded like a bat on meth, but kept up with music nicely with a good mid woofer sry i started out with pro/home audio befor ever goin into car audio

well thats different

i cleaned up my wires alot n what knot but my current box is the loudest one ive put in yet, n could really use a 120amp or so alt to help my system out a lil, i wanna mod my apillars but i cant get the damn screws out of the handles to take em off, i was gunna mount the tweets there for a better on axis sound and would be cool shit if darvex.com donated a 1/0 wireing kit for the big three http://www.stevemeadedesigns.com/board/public/style_emoticons/default/01nocomment8so.gif but all in all what kinda small system is small enough? all im runnin is 2 15's in about a 4cb custom burch downfire on 1000wrms and 150.2 on mids n highs, i think its around a 40 on a good day, but i unno, sill workin the bugs out tho, but if i get bigger alt that means more powerful amp n subs to put behind it, but i think what i got now will be louder if it had more current now that i got the big 3 done but if i dont win or even get nominated, good luck to all the others new to forum on gettin in to the sotm, and thankx dc for the prizes

scrapped? are u gettin rid of the trooper or doin a rebuild? would be kick ass with 6 dd 3500 18's if they make em(not sure tho) but all in all that trooper looks like it hits like a mule man, what was the brand of coax u had in there befor the dd's? the yellow carbon fiber ones?

what kinda headunit is it? u try grounding the rcas at the headunit n see if that works? ive blew a few caps on some smaller speakers befor due to a clipped high freq from switchin around the eq, and it just popped

lol, my mtx 500d has 3 25amp fuses so its 75amps n i kept blowing 80amp fuses, so i went with a 150amp fuse n all that stopped, might not be big enough or a bad ground not lettin current flow correctly, check inside ur box n make sure ur speaker wires connected good cause it its barally on there it will make it ark n send a short into amp causeing it to blow a fuse, what kinda amp n ohm load are u running? and how big speaker wire?

this should be sufficient for wireing this http://www.parts-express.com/pe/showdetl.c...tnumber=330-073 http://www.parts-express.com/pe/showdetl.c...tnumber=330-074 and if u need it http://www.parts-express.com/pe/showdetl.c...tnumber=500-001 if u dont want to tap into the hids relays wireing u can go this route, n get all u need for around $5

but ya u can wire it threw a relay setup, its pritty simple, why steve said a relay cause its a lil more leanient on the power u get than just tapping str8 into the headlight wireing, just run a pos wire from battery to relay, either a highbeam, or low beam pos wire from headlight wireing, or just tap into the relay harness that comes with ur hids to turn on the ballasts, n then just wire that into other relay n ur set i wished i knew how to type it out as to show it in person, but its almost as simple as installing regular hids, just a little rewireing diff stuff but still works, and make sure u heatshrink the wire cause electrical tape comes off with road grime n what knot, but other than that good luck with ur truck man

http://www.futurevisionhid.com/fog-light-k...c-35_48_43.html and i didn't mean balast, i ment the relay deal, from headlight harnes to relay switch to battery 12v n what knot, mine just has prongs thats wired to a plug that goes into ballast, guy said mine were good enulf to power the ballasts without the relay harness, so it worked out for the better, but still yet i gave $200 for my hids n fvh are alot cheaper n better quality seems like products

ied wire my foglights in with the parking lights, thats how i do it sometimes, so when the parking lights are on there on, so there kinda like driveing lights, n then turn on headlights? but u can wire off the pos low beam wire n they will stay on all the time, are u gettin 8000k h/l or just low beams? i can make it work but i dont kno exactly how to type it out on how to do so, but its acually easy to do, my regular headlight wires had enulf currnet flowing so i didn't need the whole ballast treatment for my hids, and www.futurevisionhid.com is a good place, and alot cheaper than what i payed for mine, n there part of smd so that makes it all the better hope this helps

its not expencive to get fire works, but u do get ur moneys worth, are the ones that go past 6ft legal there? here i get mine from sc n i think i spent around $150 on mine, i got 3 boxs of mortars, and 5 packs of roman candles, the mortars i get come with either 12-18 ina box, i dnt buy that wimpy walmart fake tnt shit, the real tnt stuff is good tho but what i like is cherry bomb mortars, n i got some that are cherry bomb gold lable mortars with 18 in the box n tube, when i do buy mine its around the 4th n i buy a good few, but last year i got a pack of roman candles for $1 for a pack of 5, and a huge ass pile of firecrackers for $1, i unno what kinda fireworks they have in cali but here u get what u pay for, but i always spend around $100-$200 on fireworks if ima do it, do it right but i always stay clear of bottle rockets, u cant predict were they will go, like u can a mortar, n mortars sound killer i wanna become a pyrotechnic so i can build some, n get killer discounts on em to

hmm, how much for all 4 mids n the set of tweets? i seen a vid of those n they look like somethin i would want, i want somethin that i can run active with, n whats the power rateings on those, would they love around 75-150rms each? or need more, n what kinda tweets? just a feeler cause my kickers seem to be acting wierd n would like somethin that i can really turn up, u kno what i mean? n this sold me alot name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src=" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>"> name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src=" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>" type="application/x-shockwave-flash" width="425" height="350">n this name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src=" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>"> name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src=" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>" type="application/x-shockwave-flash" width="425" height="350">so ya i want those fuckers, just 2 tho or unless u can throw me a killer deal on all 4 n tweets, remember im ona budget to with a kid n i understand money talks n what knot, but i really want these for my geo, this is the kinda sound i want

not to be off topic but why dont pioneer make those like 4000w subs anymore, i heard they was beafy as hell, n i think that amp should be fine

so basicly cant u call this a virtical clamshell? with out the angle of the baffel board, or thats how i see it, cause for it to be a 3chamber dual reflex 2 chamber bandpass i think it would halfto have some sort of porting on the front of the middle of the box to classify it as a bandpass, kinda like this so basicly its a clamshell turned on its side to maxamize airspace and make it alot cleaner i guess, cause loading a 50-80lb sub upside down must be a bitch, and it looks better imo i think thats the point everyones trying to bring across, n u can look at this site for more info on boxs http://www.the12volt.com/caraudio/boxes.asp

hell ya thats a good deal, i got 2 rockford punch he2 12's for $150, n i miss those things alot, never got to throw some real power on them, anyone kno were one might can find some old rockford stuff? ima oldschool fan myself, not sayin the new stuff isn't good but i like the older stuff, and it looked better imo

hmm, so everything is factory, even speaker size?, just a simple unscrew, unplug, then plug in new one n screw in new one kinda deal? did u mount the speaker exactly as it came out? cause some companies dont leave nere enough speaker wire in the door to work with n it might of came loose when u put the door pannel back on but i dnt think that will be it, did the door pannel accidentally hit the speaker? or maby speaker amp going bad, im not sure about this but if everything is factory then they cant be to much go wrong with it