Mikewood21

why are you guys arguing with each other, to those who are trying to help me thank you, for those who have someting smart to say your lame , talking shit over the internet come on man, and nine times out ten my money is longer than yours.

$950 . I HAVE A CUSTOM BOX FOR SALE THAT GOES WITH THEM I CAN SELL YOU EVERYTHING FOR $1200 , MESSAGE ME

NO SALE FOR JOO. Read the rules. -Drew

ITS NOT A VERSES THREAD BECAUSE IM NOT COMPARING BRANDS OF ANY KIND, I SAID WAT WILL WORK BETTER FOR MY TRUCK WITH MY DIMENSIONS EITHER FOUR 12" OR TWO 18"s..... I KINDA LIKE THE SOUND OF TWO 18"S WITH 4000 WATTS RMS GOING TO EACH ONE TUNE 33 HZ. IDK IM JUST TRYING TO GET IT CRAZY LOUD IN THERE

Sorry to keep deleting your posts, but you need to read up on the rules before you make more threads. You cannot do "vs" threads and you cannot post things for sale until you reach 150 posts. Thanks, -Drew

@decaf yea I hear you, to be honest I never used one before this is my first time, I wouldn't really care if I had one or not.

Guys to be honest I just set it from listening to it... But it's not even up that high, it's less than half way.

I need som help ASAP.. I just installed my two crescendo bc3500s today and it is pounding the he'll out of my four American bass hd 15" @2 ohms strapped. I have four kinetic hc2400s , 340 amp mechman alternator... And four runs of 0 gauge , two powers and two grounds, my back batteries are grounded to the frame of the car in the back, there ground to the motor up front. My voltage at idle is about 14.7-14.9 then when reved up 15.3-15.6. My amps didn't cut out they keep playing but every Time I hit a hard bass note my clipping indicator comes on. Wats wrong with my system.

Well I'm going to be running two crescendo bc3500s and I'm running my system with four kinetik hc 2400s in the back one in the front, four runs of 0 gauge, and a 320 amp alternator .

I talk to some high 150 plus guys who said run the grounds to the motor mount , because it's the best ground in the car.

Ok that's sounds good , now for the two power should run them like I said two batteries one and three and the grounds to 2 and 4

Ok that's sounds good , now for the two power should run them like I said two batteries one and two

Can anybody help me.????? I'm trying to run two power and two ground runs from front to back. I have a 320 mechman alt for a jeep srt8. Four kinetik hc2400s will be in the back. I was told two run my two power wires straight to the alternator along with my two grounds to the alternator motor mount. I was told to take power 1 and run that two positive on battery 1 and the other positive wire on battery 3. Run ground wire one to battery negative 2 and the other ground wire to battery negative 4. Connect battery 1 and two together positive and negative and then batteries 3 and 4 . Then link batteries 2 and 3 together. I didn't have any room in the trunk cargo area for the batteries so they are sitting on the floor so with this being said that's y I'm linking 2 and 3 together. He also said run a power wire from the alternator to front battery positive. And then take the front battery negative and run to either the frame or the motor mount were the other two grounds are. My thing is y not run the two power wires from the back to the front battery positive and the same with with the negatives.

@crunkjuice thanks man, but yea but for some reason all my boxes I ever had in there are louder when within four inches to the tailgate. See I only have room for two monster batteries or four batteries the same size as a kinetik hc2400, see I have to of those and I'm thinking bout selling those but I was Aldo thinking of just getting two more, so a total of four 2400s @zachadams, I'm going to do a pro charger and headers in June.

Yea that's wat I was thinking two 3100s in the back and one in the front. As far as my box my box s alreadly in there you guys can check it out by going to YouTube and type in mnorwood01 or four American bass hd 15"s. http://www.youtube.com/watch?v=aILTK7uJcAo