candyman74

would 6 cuft with 2 6" aero ports tuned to 32hz on a 12k , I know way too much power but gain will be set and then turned down, be an ideal box or should I go a different route. going in an 03 denali. the person Im building it for listens to mostly hip hop and occasionally the decaf stuff. the person he bought the subs from told him to do 5 cuft with 3 6" aero tuned under peak of vehicle and then plug one for daily driving. the person im building this for doesn't plan on competing so im just gonna do 2 6" tuned to 32hz which gets me around 9.4 sq in to cu ft ratio. any input would be appreciated.

getting ready to start a build in a 04 Yukon for 4 sa15 d4s on a dc 5k @ .5 ohms. my question is should I build it on the smaller side say 3.25 cuft per sub @ 33hz or go a different route because of the power they will be given? if anyone has any other suggestions. guy im doing it for wants it to play really low and loud. the box I have came up with is 13 cuft after displacement tuned to 33hz with a port of 40x4.55 for 180 sqin and 21.5 length.

4892

4251

nope, i didn't fuse the alternator wire. I almost never do. There is a fuse at each battery though. so as long as i fuse before the back batteries its cool to run straight off the alt? i would worry if for some reason i got a short somewhere between the alt and batteries the wire wouldnt be protected.

Sorry about the 2 posts i did it from my phone and i didnt see it so i made another post.

I have a level 4 m1 d2 with level 5 soft parts and i was wondering would it be ok if i got another level 4 d2 with no upgrades and put them in the same hox?

I have a level 4 m1 d2 with level 5 soft parts and an extra spider and was wondering if i was to get another level 4 with no uogrades would they work together in the same box ok?

send me one aswell but with level 5 soft parts and an extra spider but d2

what size box do you have it in?

would you be interested in selling it? i have the same woofer and i am looking for another one. i have d2 coils. or would you be intersted in getting mine so i can get 2 new ones?

i still need to make side panels for it. oh by the way its ported in the rear and it fires under the rear seat

thanks, and yes you have to reach in but not that far and you can get your hand around the shifter just fine. from the drivers position your cant even see the cut out.

i built this for a 2004 dodge ram quad cab. its 3 jl audio12 w3v3 subs off a jl xd1000/1.

i tried to download it but everytime i go to open it cant. i have windows 7 so what do i do to download it The file extension is .wma, correct? Do you have a program that can play that type of file? QuickTime does iirc. It's free. no its a .rar Use Winwar to extract the file whoo hoo i got it. forgot that i had installed a zip download on the other computer and it allowed me to download it. should get the oscope tomorrow and be back in business '

i tried to download it but everytime i go to open it cant. i have windows 7 so what do i do to download it The file extension is .wma, correct? Do you have a program that can play that type of file? QuickTime does iirc. It's free. no its a .rar

i tried to download it but everytime i go to open it cant. i have windows 7 so what do i do to download it

so no one has built a custom center console? im just looking for ideas to help me finish i have got a design but was wanting so other ones.

im looking for pics of builds or just pics of custom center console boxes. im going to be building one for a 2004 dodge ram crew cab. it had one before but was stolen and the owner wants another one built but he doesnt have any pics of it. it went from the back seat to the dash so im looking for something like that. it will contain 3 jl audio 12w3v3s.

im with you on this one. i always want to learn more.