CstrokerV

it has a vent to releave presuure when you close the hatch and doors back there but i covered it up with deadening but the condensation always happened even before that.. i dont know maybe ill get a new car lol but thanks for your help so far guys

i cant get window vent/visors my door dont have the top half support like most cars...

Well i have 95 eclipse.. i keep a sweater over my sub and amp so you cant see it when im parked anyway, After a few days i took it off it was soaked and under it was moldy, wet, and swollen so i took the sub out sonowim bassless poor me.. my hatch dont leak i went through car washes plenty of times and watched.. so it has to be the condensation on the window dripping off.. well my question is will tinting it prevent condensation from forming... thanks in advance.. Kevin

I have a 95 ecplise with that engine biggest ho alt i could find was a 180 amp 90 at idle.. if you find a bigger one let me know lol.. also its a pain to replace without a lift.. i was thinking about seeing if i could get a bracket made at the ac unti to put another one on but never got around toit

LoL um that stroker wasnt in the optimul enclosure there specs say optimul is ported if it was the 12" It should of been in a 2.5 cubed box ported to 28 hz for optimul performance that box was small, but it did look like the 1.1 sealed they recommend for a sealed box lol even at 2000 rms in a 2.5 cubed sealed box with hella clipping my 15 lasted almost 20 minutes and it only fried one coil.. plus the video doesnt say what size the box is, it doesnt even show them hooked up to the crown amps.. i dont know i was happy with my stroker and im even happeir with my stroker pro,,, anyways those orion subs do look nice just a little skeptical on the tests thats all..

lol i live in sandusky ohio . cedar fair who ones cedar point and like 18 other parks just bought 6 flags east of us in aurora ohio.. nevr been there but cedar point is straight if you ever come out this way you should check it out

bump lol

so i made a little teaser video of sub (posted in video section) anyway i was trying to do another one (but my cam sucks im going to try to find someone with a camcorder ) anyway anyone have any ideas why it flexes alot more and is loader with windows down than up? i thouhgt with windows up there would be more pressure on the car thus creating more flex anyone else have this issue anyways at least the sub sounds good lol and im happy with it by the way 3.5 cubes ported to 25 hz stroker pro 15 only thing is i have 2 3" ports and are in a bad spot ill get picks later of the ports i was trying a 15 x 2 " port but messed it up so i went the easy route lol someday ill redo it

well a little example of my stroker pro15... 3.5 cubes 25 hz i have problems with port size and placement but its all good for now sounds awesome, very clean bass sorry no sound its a few second from beats4myvan almost forgot link forgot i set my bx 2005 at 1800 watts at volume at 30 and bass level at +15 this is at 30 bass lvl at 0 www.youtube.com/profile?user=CstrokerV comments welcome come on peeps lol

you always could mount an aftermarket deck somewhere else run new speaker wires, power, ground etc..etc.. but probably would suck doing that

If both x-overs are only say 12 db slope and you want a 24db slope you will achieve that with using both... theres a section about it in the car stereo cookbook or whatever it is called..it also gives you a fromula to figure out what the xover its set at if say one is set at 80hz and the other at 60hz, what it will end up at..

Thought id stop bye and wish everyone a Happy Easter