jmsonoma03

i think that wall would protect you better than the air bag.

the white plug with the yellow wire plugs into the black plug with the orange and black wire are in the other two plugs into the big black harness you bought as far as power usually the fuse box under the dash is for ignition power and the fuse box under the hood by the battery is for the constant 12 v power.. check all the fuses under the hood esp if orange wire has no power.

those pillars are looking good glad burrito woke up hope he recovers quickly . are you going to paint the pillars or cover them.

check the voltage at both batteries if they are ok thencheck the wiring at the deck usually if the battery is dead the radio should stay on and the amps will turn on and off.

i have some of those 1ga to 4ga adapters they work good but like some one else said they are bulky depending how close the hot and ground are they may not work but the idea about stipping wire down and soldering the wire looks like a good idea.

if you have a test light test the empty pins in the deck harness turn deck on and off to find the 12v out for turn on usually you will have another wire in harness not being used like a illumination on power antenna u can pull that extra wire out of harness and plug it into the remote turn on hole in harness then connect your amp to that or you can usually get a replacement harness for deck from a stereo shop.

that sucks the same thing just happened to my wife in our new 300 today lucky just miner marks on bumper

GET WELL SOON BURRITO

im looking for both door panels for my 2003 gmc sonoma my interior is pewter but color doesnt matter non power window also

i understood from reading the tread on the door about the covering it up and resin it for better adhesion i guess what i really wanted to know if that process made the pillars stronger and sound better i know it will, i just never saw it done that way before. thanks for input 916

hey thanks for info

those pillars are going to be bad ass . so im assuming you resined the pillar first to make a soilid base for the new pods right. as soon as i see how its done right i want to try and make some for my truck.

+thanks for the info my old boss sold his shop so i dont have use of his meter.to try out my truck

does any one know how accorate the audiocontrol epic150 is i know its not 100% i have one in my truck it reads 155db when i had it in my integra it metered at 152db used my bosses termlab meter? think thats the brand it metered 142 so i figure its about 10 db off

looking good when are you going to get on those pillars i want to the same thing in my truck also i seen you ran three ground from the front to the back where did you ground up front and did you also ground at rear.dont know if already asked couldnt find info in treads

sorry

how are you going to wire up the mids and sub in door. are you going to seal the sub from the mids so mids dont distort and pop from the bass.or are you going to put a passive xover on the 10" to play midbass only. so far this is one bad ass build