Infinite913 Posted February 7, 2011 Report Share Posted February 7, 2011 I have a 96 jimmy that I want to add another 18 to but I have to keep the backseats. I am able to wall at the C-pillar and have the port blow in. I will be using 2 18" zcons from SSA they are rated at 2500rms. Right now I got the one sitting in a 7 cubic encloser tuned to 33Hz. I am currently using the SAZ3k. for the new setup I will be using the Stetsom 5k2d at 2 ohms. It pushes about 6800rms at 2 ohms at 13.8 volts. I would want the new enclosure to be tuned at 33hz because it will be used as my daily vehicle. I will be have 2 xs d3100 in the back so we will need to take into consideration that! Thanks for all your input ahead of time! Width above wheels is 59 1/2" Depth from top of seat to back is 38" Depth from bottom of seat to back is slightly under 40" Height total is 59 1/2" with ceiling out! width of wheel well is 40" Height of wheel well is 7" not sure on length Quote Link to comment Share on other sites More sharing options...
splzx3 Posted February 7, 2011 Report Share Posted February 7, 2011 Y 2 post for the same thing? Quote ________________________________________________________________________ deepsilencer, on 22 Aug 2011 - 17:32, said: splzx3, on 22 Aug 2011 - 17:27, said: i had my fun on one of his videos...till he blocked me then i got my mother into it lol after her he closed the comments xD lol your mom is a G! WTF, I never thought I'd have a conversation about cross dressers and trans-genders on a car audio forum. Link to comment Share on other sites More sharing options...
Infinite913 Posted February 7, 2011 Author Report Share Posted February 7, 2011 Y 2 post for the same thing? If you read the other post it was cause I realized i put it in the wrong Forum and didnt want to slop up the SITE! there are specific categories for a reason and I was hoping to get that one deleted by an admin so that it doesnt waste space on the SITE! Quote Link to comment Share on other sites More sharing options...
splzx3 Posted February 7, 2011 Report Share Posted February 7, 2011 Sorry im on my phone bro I can't see where the post are at Quote ________________________________________________________________________ deepsilencer, on 22 Aug 2011 - 17:32, said: splzx3, on 22 Aug 2011 - 17:27, said: i had my fun on one of his videos...till he blocked me then i got my mother into it lol after her he closed the comments xD lol your mom is a G! WTF, I never thought I'd have a conversation about cross dressers and trans-genders on a car audio forum. Link to comment Share on other sites More sharing options...
Infinite913 Posted February 7, 2011 Author Report Share Posted February 7, 2011 Sorry im on my phone bro I can't see where the post are at were good bro, no hard feelings. just lookin for input on tuning bracing and all that fun stuff! Quote Link to comment Share on other sites More sharing options...
Red-navi-916 Posted February 7, 2011 Report Share Posted February 7, 2011 I have a 96 jimmy that I want to add another 18 to but I have to keep the backseats. I am able to wall at the C-pillar and have the port blow in. I will be using 2 18" zcons from SSA they are rated at 2500rms. Right now I got the one sitting in a 7 cubic encloser tuned to 33Hz. I am currently using the SAZ3k. for the new setup I will be using the Stetsom 5k2d at 2 ohms. It pushes about 6800rms at 2 ohms at 13.8 volts. I would want the new enclosure to be tuned at 33hz because it will be used as my daily vehicle. I will be have 2 xs d3100 in the back so we will need to take into consideration that! Thanks for all your input ahead of time! Width above wheels is 59 1/2" Depth from top of seat to back is 38" Depth from bottom of seat to back is slightly under 40" Height total is 59 1/2" with ceiling out! width of wheel well is 40" Height of wheel well is 7" not sure on length i see what u did there, but if i was you i wouldnt find out the real power it pushes at bla bla bla bla volts bla... if you know how to wall at the b pillar nothing changes when u wall at the c pillar Quote BUILDLOG http://www.stevemeadedesigns.com/board/ind...showtopic=61862 "98crewcab"Never a POS....just always "a work in progress" lol that's how we roll bitches!!! Your a lowlife kid. I bet your mother wants to kill herself for not swallowing your ass. Link to comment Share on other sites More sharing options...
Infinite913 Posted February 7, 2011 Author Report Share Posted February 7, 2011 I have a 96 jimmy that I want to add another 18 to but I have to keep the backseats. I am able to wall at the C-pillar and have the port blow in. I will be using 2 18" zcons from SSA they are rated at 2500rms. Right now I got the one sitting in a 7 cubic encloser tuned to 33Hz. I am currently using the SAZ3k. for the new setup I will be using the Stetsom 5k2d at 2 ohms. It pushes about 6800rms at 2 ohms at 13.8 volts. I would want the new enclosure to be tuned at 33hz because it will be used as my daily vehicle. I will be have 2 xs d3100 in the back so we will need to take into consideration that! Thanks for all your input ahead of time! Width above wheels is 59 1/2" Depth from top of seat to back is 38" Depth from bottom of seat to back is slightly under 40" Height total is 59 1/2" with ceiling out! width of wheel well is 40" Height of wheel well is 7" not sure on length i see what u did there, but if i was you i wouldnt find out the real power it pushes at bla bla bla bla volts bla... if you know how to wall at the b pillar nothing changes when u wall at the c pillar This would be my first wall so I dont actually no how to wall yet. I have seen logs and have a good idea but dont know much about tuning and all that fun jazz. I was just throwing the specs in case someone needs it for number crunching or something. I would just rather be over informing than not enough. I have kinda come to the conclusion that with the wall i cant do the port in the middle I think not exactly a scientist. I was thinking maybe the port on top maybe 220sq of port area somewhere in there! Quote Link to comment Share on other sites More sharing options...
C-Fizzy Posted February 7, 2011 Report Share Posted February 7, 2011 What he was getting at. Is that the Stetsom 5K, doesn't put out 6800 at 2 ohms. No way in hell's kitchen. Quote under construction I hate People with crappy primered cars rolling on hubcaps that are louder then me. u hate c-fizzy? Link to comment Share on other sites More sharing options...
Infinite913 Posted February 7, 2011 Author Report Share Posted February 7, 2011 What he was getting at. Is that the Stetsom 5K, doesn't put out 6800 at 2 ohms. No way in hell's kitchen. I dont know what he was getting at. I just wanted to let the amount of power I would be using for the total setup! Quote Link to comment Share on other sites More sharing options...
Infinite913 Posted February 7, 2011 Author Report Share Posted February 7, 2011 What he was getting at. Is that the Stetsom 5K, doesn't put out 6800 at 2 ohms. No way in hell's kitchen. I dont know what he was getting at. I just wanted to let the amount of power I would be using for the total setup! http://www.stetsom.com.br/eng/DetalhesProduto.aspx?c=8101&cat=172 and when I clamped the 2k5 at 2 ohms it actually did a true 3540rms at 14.2 volts Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.