MrSkippyJ Posted February 8, 2011 Report Share Posted February 8, 2011 does your amp have the RCA open LEDs? Quote F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69 Link to comment Share on other sites More sharing options...
bigmescan Posted February 8, 2011 Author Report Share Posted February 8, 2011 Not sure what u just asked Quote SONY XAV-701HDRF power 400.4 RF power 1000bd 3 Sundown x8's d22004 f150 single cab2 sets of components MB quart 6.5 onx (2 tweets 2 6.5 perdoor)stock batt up fronBIG 3http://www.stevemead...-vid-pg-11-922/http://www.youtube.c.../TheBigmescan74 Link to comment Share on other sites More sharing options...
MrSkippyJ Posted February 8, 2011 Report Share Posted February 8, 2011 Not sure what u just asked Does the amp have LED lights on the amp that show when a RCA cable is unplugged. But forget the question anyway...I know the answer. I would just make sure that the amp is set to accept 2 sets (front and rear) of RCA inputs. Make sure both sets of RCAs are working. Switch the around and play with your fader then. Quote F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69 Link to comment Share on other sites More sharing options...
bigmescan Posted February 8, 2011 Author Report Share Posted February 8, 2011 (edited) I've done that. And I'm sure everything is correct. My next step is to pull head unit and check one more time and make sure everything is hooked where its supposed to be.and amp has front and rear inputs for rca's. Not trying to sound like an asshole but if they where not hooked up then the rear wouldn't play at all. Edited February 8, 2011 by bigmescan Quote SONY XAV-701HDRF power 400.4 RF power 1000bd 3 Sundown x8's d22004 f150 single cab2 sets of components MB quart 6.5 onx (2 tweets 2 6.5 perdoor)stock batt up fronBIG 3http://www.stevemead...-vid-pg-11-922/http://www.youtube.c.../TheBigmescan74 Link to comment Share on other sites More sharing options...
MrSkippyJ Posted February 8, 2011 Report Share Posted February 8, 2011 I've done that. And I'm sure everything is correct. My next step is to pull head unit and check one more time and make sure everything is hooked where its supposed to be.and amp has front and rear inputs for rca's. Not trying to sound like an asshole but if they where not hooked up then the rear wouldn't play at all. they would if the amp is set up in 2 channel mode rather than 4 channel mode. I did that with mine the first time, front RCAs for mids/highs and rear RCAs for subs. Had the switch on my amp set to 2 channel input and the sub level knob wasn't working on teh 3sixty. It took me a second but I remembered I forgot to switch the amp to 4 channel input, did that and it worked. Quote F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69 Link to comment Share on other sites More sharing options...
bigmescan Posted February 8, 2011 Author Report Share Posted February 8, 2011 Ok so if its on 2 channel all four will still play. And if I adjust HU X-over for front rear and sub and it adjusts coreectly. I will check one more time gimme like 5 min. Quote SONY XAV-701HDRF power 400.4 RF power 1000bd 3 Sundown x8's d22004 f150 single cab2 sets of components MB quart 6.5 onx (2 tweets 2 6.5 perdoor)stock batt up fronBIG 3http://www.stevemead...-vid-pg-11-922/http://www.youtube.c.../TheBigmescan74 Link to comment Share on other sites More sharing options...
bigmescan Posted February 8, 2011 Author Report Share Posted February 8, 2011 I've done that. And I'm sure everything is correct. My next step is to pull head unit and check one more time and make sure everything is hooked where its supposed to be.and amp has front and rear inputs for rca's. Not trying to sound like an asshole but if they where not hooked up then the rear wouldn't play at all. they would if the amp is set up in 2 channel mode rather than 4 channel mode. I did that with mine the first time, front RCAs for mids/highs and rear RCAs for subs. Had the switch on my amp set to 2 channel input and the sub level knob wasn't working on teh 3sixty. It took me a second but I remembered I forgot to switch the amp to 4 channel input, did that and it worked. Well it was on 2 channel appreciate the help. I don't know how it got switched but it was. Thanks again Quote SONY XAV-701HDRF power 400.4 RF power 1000bd 3 Sundown x8's d22004 f150 single cab2 sets of components MB quart 6.5 onx (2 tweets 2 6.5 perdoor)stock batt up fronBIG 3http://www.stevemead...-vid-pg-11-922/http://www.youtube.c.../TheBigmescan74 Link to comment Share on other sites More sharing options...
MrSkippyJ Posted February 8, 2011 Report Share Posted February 8, 2011 Well it was on 2 channel appreciate the help. I don't know how it got switched but it was. Thanks again no worries, glad it is resolved! Quote F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69 Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.