DamienfromFrance Posted September 14, 2007 Report Posted September 14, 2007 in fact with a dual 2ohms...you can have 1ohm(parallel wiring) or 4ohms(serie wiring) so the solution with your two BL are 0,5ohm , 2ohms orrrrrrrrrrrrrrrrrrrrrrrrrrrrrr 8ohms to have 2ohms with your two BL ..... each BL wiring parallel (1ohm each BL) and wiring the two BL serie... sorry for my poooooooooooorrrr english Quote Mercedes CLK Kompressor Alpine CDE 9881 RB Digital Designs Z1 <--------------fuc@@@@ng amp 15" Fi audio Btl full loaded 3.7 cuft @ 33hz with 50 square port Northstar NSB 90 all 1/0 power and ground
AI James Posted September 14, 2007 Report Posted September 14, 2007 well i say 2ohm because its probablt going to be less of a drain to run a 2ohm load then it is a half ohm load Quote
zaxfire69 Posted September 14, 2007 Author Report Posted September 14, 2007 Yeah but the problem is I have this amp..It is nice....Don't want to get rid of it...Cause they don't make it anymore...And I am a broke azz Fireman...Ha Ha.. Quote
DamienfromFrance Posted September 14, 2007 Report Posted September 14, 2007 well i say 2ohm because its probablt going to be less of a drain to run a 2ohm load then it is a half ohm load yep 2ohms seems to be the best choice Quote Mercedes CLK Kompressor Alpine CDE 9881 RB Digital Designs Z1 <--------------fuc@@@@ng amp 15" Fi audio Btl full loaded 3.7 cuft @ 33hz with 50 square port Northstar NSB 90 all 1/0 power and ground
GHOPPOMAN Posted September 14, 2007 Report Posted September 14, 2007 Jump the - of the first coil to the + of the second coil then use the + of the first coil and the - of the second coil for inputs. that makes eack sub 4 ohm. put both sub input + to the + on the amp and both sub input - to the - on the amp = 2 ohm load at the amp Quote
zaxfire69 Posted September 14, 2007 Author Report Posted September 14, 2007 (edited) Where is an Old School Us Amp when you need one...The ones that would put out huge amounts at 2 ohms... Oh Assman has the amps I need...I could use that 2000x..2 x 1000w @ 2 ohms.... Edited September 14, 2007 by zaxfire69 Quote
Derrick824 Posted September 15, 2007 Report Posted September 15, 2007 (edited) Hifonics Colossus 1600watts x 2 @ 1ohm 3200watts x 1 @ 2ohm $688 shipped from Sonic Electronix http://cgi.ebay.com/HIFONICS-XXV-COLOSSUS-...1QQcmdZViewItem I'm running a pair of RF T1Ks on my Bls. You can get a pair of them from HDA for $307 shipped each. http://cgi.ebay.com/ROCKFORD-FOSGATE-POWER...1QQcmdZViewItem Edited September 15, 2007 by Derrick824 Quote
Guest Nismofreak Posted September 15, 2007 Report Posted September 15, 2007 I would run that hifonics if you get it at bridged mode......Its a great amp Quote
Guest MegaloManiac Posted September 15, 2007 Report Posted September 15, 2007 Well I am purchasing another Dual 2 ohm BL 15 and I am going to run .5 ohms..What other wiring options do I have?? wire them in Series-Parallel each sub wire in series to get a 4ohm load then wire them together into parallel to get 2ohms Quote
AI James Posted September 15, 2007 Report Posted September 15, 2007 i second getting a collosus Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.