lolitskasey Posted March 8, 2011 Report Posted March 8, 2011 Alright so my friend has a RF Punch 200-2, and i wanted to run it @4 ohms bridged. Would i need a D2 or a D4 to do this? Thanks, Kasey
Purplehaze Posted March 8, 2011 Report Posted March 8, 2011 Are you talking one sub or two? If it's one sub, them you need a D2 to get to 4ohm If two, the D4. Here is a link to help you Sub Wiring Kickin' Cruiser Seller Feedback Stage 3 Dash, Door Panels,4th Order wall 4 - 15'son a DC 5.0K 2 DC 5.0K'sSolo X 15 (v.2) Sub Build
lolitskasey Posted March 8, 2011 Author Report Posted March 8, 2011 Are you talking one sub or two? If it's one sub, them you need a D2 to get to 4ohm If two, the D4. Here is a link to help you Sub Wiring Thank you but i figued it out
BeachJoshua Posted March 8, 2011 Report Posted March 8, 2011 That's an awfully high ohm load in subwoofer world. | S-10 | 4.5^3 ft | 33Hz | SAE-1000D @ 1 Ohm | 2 SA-12s | SPL: 143.7 Sealed | 153.4 Port Wars
Recommended Posts
Archived
This topic is now archived and is closed to further replies.