01pontiac Posted March 14, 2011 Report Share Posted March 14, 2011 I was wondering if it was possible to wire a 12" Alpine type x to 1ohm? I have been looking around and couldn't find anything about it. Quote Link to comment Share on other sites More sharing options...
98crewcab Posted March 14, 2011 Report Share Posted March 14, 2011 I was wondering if it was possible to wire a 12" Alpine type x to 1ohm? I have been looking around and couldn't find anything about it. only if it is a dual 2ohm voice coil....what do you have, dual 2ohm, or dual 4ohm? Quote 06 2500hd, 6.0L, 4l80e, 4wd, (muah work truck) 7" BDS HC lift kit (5) 37x13.5R18 Toyo Open Country M/Ts (5) 18x10 Moto Metal MO962 tablet in lieu of deck blue tooth interconnect to soundstream eq (for volume control and bass control) 4 Alpine type r 10's 6 cubes net, 80sqin's port, tuned to 33hz 2 brutus brx5000.5's 2 pairs 3" polk audio for a pillars 4 pairs polk audio 6.5 comps 1 pair 8" polk audio for mids 2 xspower d3400 batteries.....learning alot from meade and his circle of some of the baddest installers ive seen- thanks guys, for not being so cocky and posting the way it should be done!P.S. Thanks Steve....for the demo!!!! loud as fauk! Link to comment Share on other sites More sharing options...
BeachJoshua Posted March 14, 2011 Report Share Posted March 14, 2011 I was wondering if it was possible to wire a 12" Alpine type x to 1ohm? I have been looking around and couldn't find anything about it. On their site if you look under the other subs it says "SWR-1023D 10" Subwoofer (2Ω + 2Ω) <-- the thing in parenthesis Price: $179.95" If they make a dual 2ohm [2 voice coils each one is rated at 2 ohms] or if you buy (2) dual 4ohm voice coils [2 Voice coils each one is rated at 4ohms.] Quote | S-10 | 4.5^3 ft | 33Hz | SAE-1000D @ 1 Ohm | 2 SA-12s | SPL: 143.7 Sealed | 153.4 Port Wars Link to comment Share on other sites More sharing options...
01pontiac Posted March 14, 2011 Author Report Share Posted March 14, 2011 I was wondering if it was possible to wire a 12" Alpine type x to 1ohm? I have been looking around and couldn't find anything about it. only if it is a dual 2ohm voice coil....what do you have, dual 2ohm, or dual 4ohm? They are dual 4ohm. Quote Link to comment Share on other sites More sharing options...
98crewcab Posted March 14, 2011 Report Share Posted March 14, 2011 I was wondering if it was possible to wire a 12" Alpine type x to 1ohm? I have been looking around and couldn't find anything about it. only if it is a dual 2ohm voice coil....what do you have, dual 2ohm, or dual 4ohm? They are dual 4ohm. then you can only wire a single sub to 2 ohms:( but you can wire 2 of those subs to 1 ohm:) Quote 06 2500hd, 6.0L, 4l80e, 4wd, (muah work truck) 7" BDS HC lift kit (5) 37x13.5R18 Toyo Open Country M/Ts (5) 18x10 Moto Metal MO962 tablet in lieu of deck blue tooth interconnect to soundstream eq (for volume control and bass control) 4 Alpine type r 10's 6 cubes net, 80sqin's port, tuned to 33hz 2 brutus brx5000.5's 2 pairs 3" polk audio for a pillars 4 pairs polk audio 6.5 comps 1 pair 8" polk audio for mids 2 xspower d3400 batteries.....learning alot from meade and his circle of some of the baddest installers ive seen- thanks guys, for not being so cocky and posting the way it should be done!P.S. Thanks Steve....for the demo!!!! loud as fauk! Link to comment Share on other sites More sharing options...
01pontiac Posted March 14, 2011 Author Report Share Posted March 14, 2011 I was wondering if it was possible to wire a 12" Alpine type x to 1ohm? I have been looking around and couldn't find anything about it. only if it is a dual 2ohm voice coil....what do you have, dual 2ohm, or dual 4ohm? They are dual 4ohm. then you can only wire a single sub to 2 ohms:( but you can wire 2 of those subs to 1 ohm:) Great because i have 2 of them. Where do I put the clips on the subs because there are 3 differnt spots and also what holes do i put the wires in? Thanks Quote Link to comment Share on other sites More sharing options...
01pontiac Posted March 14, 2011 Author Report Share Posted March 14, 2011 How do I wire 2 of those to 1ohm? Quote Link to comment Share on other sites More sharing options...
illiniboy17 Posted March 14, 2011 Report Share Posted March 14, 2011 put the clips in the 2 outside spots, so the middle one should be empty and it will take it down to a 2 ohm load, then wire + to + and - to - and it will take you down to a 1 ohm load Quote Car: 1995 Thunderbird System: Pioneer deh5100ub HU Pioneer/Lightning Audio 5x7's 1 Hifonics 1610D amp 2 Obsidian Audio 12's 4cu.ft. box tuned to 30hz 8 farad Boss Audio cap 4 gauge power/ground wire Youtube Facebook Link to comment Share on other sites More sharing options...
RickyFriery97 Posted March 14, 2011 Report Share Posted March 14, 2011 (edited) Edited March 14, 2011 by RickyFriery97 Quote 2014 Chevy Silverado Crewcab 1994 Chevy Full Size blazer Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.