byers319 Posted March 16, 2011 Report Share Posted March 16, 2011 Is it easier to glue them together and just cut the top one twice, second time only cutting the top piece. Or cutting them separately then gluing them together? Quote Link to comment Share on other sites More sharing options...
matt402 Posted March 16, 2011 Report Share Posted March 16, 2011 i think its easiest & most accurate to cut both at the same time, its just harder on ur blade . Quote Link to comment Share on other sites More sharing options...
fritosaregood Posted March 16, 2011 Report Share Posted March 16, 2011 I always cut the bottom layer first, then glue on the second layer and use a flush trim bit to get the second hole to match up. Quote seller feedback: http://www.stevemeadedesigns.com/board/ind...showtopic=61719 http://www.stevemeadedesigns.com/board/ind...showtopic=68281 build log: http://www.stevemeadedesigns.com/board/index.php?showtopic=44800 Gf's build: http://www.stevemeadedesigns.com/board/topic/54346-kickergirls-camaro-new-box-pg-5/#entry753970 Link to comment Share on other sites More sharing options...
chevyhoe08 Posted March 16, 2011 Report Share Posted March 16, 2011 ^^^^ i do the same. but what tool are you using to cut the hole. Quote 2-18" Fi Btls 2-RF T2500-1bd box 14cu.ft after displacement tuned @ 32hz. Socal Box Designer/builder Link to comment Share on other sites More sharing options...
fritosaregood Posted March 16, 2011 Report Share Posted March 16, 2011 ^^^^ i do the same. but what tool are you using to cut the hole. Me? i use a router with a spiral down cut bit for the first hole Quote seller feedback: http://www.stevemeadedesigns.com/board/ind...showtopic=61719 http://www.stevemeadedesigns.com/board/ind...showtopic=68281 build log: http://www.stevemeadedesigns.com/board/index.php?showtopic=44800 Gf's build: http://www.stevemeadedesigns.com/board/topic/54346-kickergirls-camaro-new-box-pg-5/#entry753970 Link to comment Share on other sites More sharing options...
byers319 Posted March 16, 2011 Author Report Share Posted March 16, 2011 (edited) ^^^^ i do the same. but what tool are you using to cut the hole. Down cut or spiral down cut or whatever its called. But the front one I'm going to round over. Edit: so a router Edited March 16, 2011 by byers319 Quote Link to comment Share on other sites More sharing options...
byers319 Posted March 16, 2011 Author Report Share Posted March 16, 2011 Sorry if I didn't make this clear, but I'm flush mounting the sub. Hence the round over on the front one. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.