chevyhoe08

WHERE CAN I GET ONE PLEASE... HOW MUCH DO THEY RUN? PLEASE CAN I HAVE A SPECIFICATIONS LINK....PLEASE...TY x2

what i really want to know is how did you get that 18" level 6?

what i did was weld a 1.5"x 1/4" x the lenth i needed, metal bar. to the top of the rear deck just along where my cut ended. never had a problem at all. car is a 02 lincoln LS

You can rent a 4 1/2" inch grinder at The home depot for like 5 bucks an hour or maybe less, and just buy a couple of cut-off wheels there about 2 bucks each you might need 2, if this is your first time using a tool like this i suggest buying some safety glasses and a pair of thick leather gloves. Also just a tip when you are cutting, cut very slow and hold that grinder real good, real good.! Good Luck.

how do you plan on 3 15"s when the biggest dimension on the box 40"

^^^^ i do the same. but what tool are you using to cut the hole.

I cant wait for this thing to be out. I am in the middle of 2 builds and i wish this thing comes out before i am done with them. steve should have a pre-order special for SMD member that would be sick.

i buy wholesale ddm hid kits and i also install them. let me just say that the rumors of them using one light bulb for many colors is a big lie. i can tell the difference between the 5k and 6k big difference in color. but overall they sell very good kits and are backed with a lifetime warranty.

what are your max dimensions?

I design this box for you real quick, let me know if you like it. Box Dimensions Height - 14" width - 30" Depth - 18" Port Dimensions Height - 12.5" width - 3" length - 22" Box Stats cu.ft after displacement 2.62 @ 36.75Hz Add some bracing and that will bring you to 2.5cu.ft @ 37hz Cut Sheet List Top - 30"x18" bottom - 30"x18" sides - 12.5"x16.5" Back - 30"x12.5"

how far are you from San Diego?

are you putting the box behind 3rd row seats or behind 2nd row seats.?

what are your max dimensions heigth, width, depth.

give us the dimensions of where you want the subwoofers to be than we can help you.

looks good. just make sure you bend your port left and right to keep your 6" width all the way thur.