Supercharged DCs Posted April 2, 2011 Report Posted April 2, 2011 Don't really know much about amps besides how to set the gain. I bought the amp from a friend who had bought it from a audio shop. Amp is a rf p200.2. Im using it to power my 15" DD 3515 right now until I can get the AQ2200D. Sub doesn't sound bad at all, gets loud as hell off of just 287W bridged. But I can hear a little midrange coming through the sub. i noticed it when i had the amp hooked to a cvr too. What can i do to change this? Bassless once again. Can't seem to keep a system for more than a few weeks Saving for a '06 Nissan 350z, look for build around June 2012.
Coolwazabi Posted April 2, 2011 Report Posted April 2, 2011 not sure what features the amp has but set the LPF to 80hz.. maybe ur deck will have it.
zayres29 Posted April 2, 2011 Report Posted April 2, 2011 yeah that was my first guess the low pass is too high Btw that was the first person. Ever banned by me while dropping a deuce. Feel privileged
Supercharged DCs Posted April 2, 2011 Author Report Posted April 2, 2011 Deck only has the regular things you would get on a 100$ walmart deck xD The amp has like a toggle switch that has a little slider that you can set on LP, AP, or HP. The slider is on the LP right now and the filter knob (i think?) is set to the lowest it goes, 60hz i believe. Bassless once again. Can't seem to keep a system for more than a few weeks Saving for a '06 Nissan 350z, look for build around June 2012.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.