zeus245 Posted May 3, 2011 Report Posted May 3, 2011 i have a 2 x JL audio 12v3 dual coil.... any1 here use this subwoofer? and box wise, how do i get the most out of this subwoofer? btw this sub will be powered by a kicker kx400.2.... thanks for the help Quote HU: Kenwood DDX5034 front stage: Focal 165 v Slim component back stage: Infiniti 652i component amp: kenwood 4channel sub amp: sony mono 800watts peak wired to 2 ohms subwoofer: 3 12" Kenwood subs (from my old car)
zayres29 Posted May 3, 2011 Report Posted May 3, 2011 what vehicle what coil config Quote Btw that was the first person. Ever banned by me while dropping a deuce. Feel privileged
zeus245 Posted May 3, 2011 Author Report Posted May 3, 2011 its a toyota innova.... a SUV i think... the woofer is dual coil each 4 ohms.... Quote HU: Kenwood DDX5034 front stage: Focal 165 v Slim component back stage: Infiniti 652i component amp: kenwood 4channel sub amp: sony mono 800watts peak wired to 2 ohms subwoofer: 3 12" Kenwood subs (from my old car)
zayres29 Posted May 3, 2011 Report Posted May 3, 2011 W0? W1? ... W7? which model Quote Btw that was the first person. Ever banned by me while dropping a deuce. Feel privileged
zeus245 Posted May 3, 2011 Author Report Posted May 3, 2011 opss sori hehe its 12w3 dual coil Quote HU: Kenwood DDX5034 front stage: Focal 165 v Slim component back stage: Infiniti 652i component amp: kenwood 4channel sub amp: sony mono 800watts peak wired to 2 ohms subwoofer: 3 12" Kenwood subs (from my old car)
zayres29 Posted May 3, 2011 Report Posted May 3, 2011 (edited) H:15" W:30" D:15" Port H:13.5" W:2" D:20" Tuned to 36hz 27" of port subs up port back Edited May 3, 2011 by zayres29 Quote Btw that was the first person. Ever banned by me while dropping a deuce. Feel privileged
zeus245 Posted May 3, 2011 Author Report Posted May 3, 2011 can i make it bigger or change the dimension, i have a space measured up, the maximum i can put in the back is W:40" H:17" D:21"... i was thinking of making a diamond shaped port. btw, what do u think about the amp i use, will that do the job? Quote HU: Kenwood DDX5034 front stage: Focal 165 v Slim component back stage: Infiniti 652i component amp: kenwood 4channel sub amp: sony mono 800watts peak wired to 2 ohms subwoofer: 3 12" Kenwood subs (from my old car)
zayres29 Posted May 3, 2011 Report Posted May 3, 2011 that amp will be ok they could probably take a little more power but its probably not needed you can do the box however you want i want just making suggestions just make sure you stay in the 32-36hz range with tuning and make sure you have enough port area Quote Btw that was the first person. Ever banned by me while dropping a deuce. Feel privileged
zeus245 Posted May 3, 2011 Author Report Posted May 3, 2011 (edited) with the dimension u gave, thats around 3 ft3 of volume rite? what if i make it a 4ft3 volume? and who do i wire this dual? wire them to 4ohm and bridge it or wire each sub to 2 ohms to each channel? Edited May 3, 2011 by zeus245 Quote HU: Kenwood DDX5034 front stage: Focal 165 v Slim component back stage: Infiniti 652i component amp: kenwood 4channel sub amp: sony mono 800watts peak wired to 2 ohms subwoofer: 3 12" Kenwood subs (from my old car)
08tahoe Posted May 3, 2011 Report Posted May 3, 2011 either of the ways you suggested you will get about the same power. this is what i found for your amp Dynamic Power Rating (measured at 14.4V): Bridged Into A 4-Ohm Load: 435 watts x 1 Per Channel Into A 2-Ohm Load: 217 watts x 2 Per Channel Into A 4-Ohm Load: 150 watts x 2 Continuous Power Rating (measured at 13.8V): Bridged Into A 4-Ohm Load: 400 watts x 1 Per Channel Into A 2-Ohm Load: 200 watts x 2 Per Channel Into A 4-Ohm Load: 100 watts x 2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.