CJ18 Posted May 8, 2011 Report Posted May 8, 2011 (edited) This is the console I have in my truck now but you could easily build it to house a 10 or 12 if you want to. Edited May 8, 2011 by CJ18 Quote
Kush Killer Posted May 8, 2011 Author Report Posted May 8, 2011 Surprised no one has mentioned putting SA 8's in some custom doors/kickpanels. One for each door... yeah i guess that could POSSIBLY be a option... im really jsut hoping that im able to do 4 8"s under the rear seat in a ported enclosure Quote ............................................
Kush Killer Posted May 8, 2011 Author Report Posted May 8, 2011 This is the console I have in my truck now but you could easily build it to house a 10 or 12 if you want to. thats really nice! but a lil more in depth that im willing to do with this truck Quote ............................................
Supercharged DCs Posted May 8, 2011 Report Posted May 8, 2011 Max dimensions for use under the seats? Quote Bassless once again. Can't seem to keep a system for more than a few weeks Saving for a '06 Nissan 350z, look for build around June 2012.
CJ18 Posted May 8, 2011 Report Posted May 8, 2011 Here are some pics I found of a center console build I did 2 years ago. Built for 4 Kicker L7 10s. Quote
Kush Killer Posted May 8, 2011 Author Report Posted May 8, 2011 Max dimensions for use under the seats? lol well thats the thing i havent been able to get out there and measure it my self ( i know i know) but, goin off "pre-build" sealed enclosures.. the largest ive found was a down firing, 2 chamber (2 10"s r 12") with 1.6cubes per chamber... the demensions off of that say to be.. 52x16.75x10.75. but i know the front side of the seat is obviously tall than the back side so the top side of enclosure slopes donward... Quote ............................................
Kush Killer Posted May 8, 2011 Author Report Posted May 8, 2011 im gonna go smoke a cig rite quick and see if i can get sum measurements.. if not i will def. post my MAX demensions first thing in the morning. I got 4 sheets of .75 mdf a fresh coat of wax on my table saw im ready to get to cutting Quote ............................................
Kush Killer Posted May 8, 2011 Author Report Posted May 8, 2011 ok so i took sum ruff measurements id say about 90% accurate i can compensate for the rest... rear height 8" front hight 10.75 " depth 14.5" width 59" center hump width 16" hump height 3.75" Quote ............................................
Kush Killer Posted May 8, 2011 Author Report Posted May 8, 2011 so any one wana help with a ported enclosure for 2-4 SA 8"s? Quote ............................................
BassHead143 Posted May 10, 2011 Report Posted May 10, 2011 so any one wana help with a ported enclosure for 2-4 SA 8"s? Well im in the process right now for building a box for 4 sa8s in my 92 silverado, im going to lift the seat 2 inches. The Width is 62'' The Depth is 14.5'' The Front Hieght is 11.5'' The Rear Hieght is 7.5'' Fiberglassed the bottom and going to add another baffle to front. Going to have 2 4'' aero ports in the middle with 2 45 going opposite ways behind subs. port displacment is around .30-.35 Sub displacment is .40 I filled the enclosure with water and got about 3.2 Cubes so with all displacments i should have 2.4 - 2.5 cubes net internal Tuned to 34 hertz. Note not done yet this is mid build of my box, just trying to help. More images on my photobucket if you want check them out... http://s1195.photobucket.com/albums/aa395/BassHead143/ Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.