fi audio Posted May 13, 2011 Report Posted May 13, 2011 what electrical upgrades would i need to get by to run 2 audioque 1200d amps? i think my truck has a 110 amp alt now just stock should i go with a new alt and battery or just battery or two? it drops in like high 12s some times not often usually stays in 13s thats with just 1 audioque 1200d Setup: Headunit: 7" indash screen Sub: fi bl 12 Amp: Audioque 1200D Box Ported tuned to 34hz Big 3 done in 1/0 gauge
Stee-Z Posted May 13, 2011 Report Posted May 13, 2011 A new alt would be the best option, but if it is not in our budgetI would just get two batteries, or maybe one decent battery like the XS 3100 could probly handle it. (4)DD 9918's (2)DC 10k 8 6.5" focals 2 DD SS4 mid amps Audison Bit One processor Jl-cl-rlc line driver iPad in dash Dual Irragi 320a alts 8 batcaps 4000's Second Skin sound deadened
fi audio Posted May 13, 2011 Author Report Posted May 13, 2011 A new alt would be the best option, but if it is not in our budgetI would just get two batteries, or maybe one decent battery like the XS 3100 could probly handle it. u think if i just got a 240 amp dc alt 150 amps at idle would be fine with just my battery up front and mabey add one in the future if it needs it or should i just get the batterys? and get the alt later? Setup: Headunit: 7" indash screen Sub: fi bl 12 Amp: Audioque 1200D Box Ported tuned to 34hz Big 3 done in 1/0 gauge
blownengine Posted May 13, 2011 Report Posted May 13, 2011 Why two 1200's? Why not a single 2200 or something? Less draw from your batteries. 2003 Dodge Ram 1500 SLT (Yea its got a Hemi)Alpine CDA-105KnuKonceptz 0ga CCA Big 3 with Yellow Top 15" SoundQubed HDC3DC Audio 1.2K (Bass)Pioneer 6x9's (Front)Pioneer 6.5's (Rear)Kicker 3.5's (Dash)Sony amp on the highs. (Hey it was free)
fi audio Posted May 13, 2011 Author Report Posted May 13, 2011 Why two 1200's? Why not a single 2200 or something? Less draw from your batteries. yea i would like to do that to thats my next option but for wireing both 12s to each get 1100 watts what ohm would i need to wire it to u got a link to a diagram or a picture or something also both subs would be dual 2 ohm Setup: Headunit: 7" indash screen Sub: fi bl 12 Amp: Audioque 1200D Box Ported tuned to 34hz Big 3 done in 1/0 gauge
Recommended Posts
Archived
This topic is now archived and is closed to further replies.