Bridged wire question

[SPLVan]

to start off my dvc subs have tiny little push button terminals. about 12ga. and to wire them down to 1 ohm i would obviously need bridged wire. but as you can see in theDiagramone of those terminals is going to hold 3 wires. i have 12g wires. so would be okay if i used some much smaller wire to connect the coils to eachother? and then ran the 12ga to connect both subs and to the amp?

[MrSkippyJ]

no, use big enough wire. Find another place to connect the subs together rather than the subs terminals so you don't have that many wires going to a single terminal.