Box For Two 15'' Alpine Type Rs

[C.Sanchez.A]

What would should the box size be. The specs ask for a 1.5 - 3 cubic foot box each. From the past I'm going to say 100 - 200 square inches of port.

It going in a Tahoe, port and subs back.

Thanks In Advance

[C.Sanchez.A]

No impute?

[RAM_Designs]

How much power will you be putting to them? If you're running around RMS wattage to them, then 7ft^3 with a 33-35hz tuning and 100-120in^2 of port should work well. Shrink the box volume down a little if you plan on throwing more power at them.

Edited May 21, 2011 by RAM_Designs

[C.Sanchez.A]

Thanks

[C.Sanchez.A]

This is what I came up with...

Edited May 21, 2011 by C.Sanchez.A

[Guest]

you forgot to put in "3" for # common port walls.

[C.Sanchez.A]

you forgot to put in "3" for # common port walls.

I knew I was forgetting something...

[C.Sanchez.A]

Her Is the new look...

[moto211]

dont forget your bracing , 30htz might be a little to low ,imo.. maybe 33-35 just a thought one more thing , i have always had good luck with the speakers firing up in a tahoe , with the port firing back , just an idea...

Edited May 21, 2011 by moto211

[C.Sanchez.A]

It's not for me. They person wanted it sub back port back, tuned to 30 - 32 hz. The new one is 31.5Hz.

I give them what they want. Unless it is completely unrealistic.