deathcards Posted May 22, 2011 Author Report Share Posted May 22, 2011 http://www.audiosavings.com/products/4-Channel-Car-Amplifier/CADENCE-F400-4-1000-WATT-4-CHANNEL-CAR-AMPLIFIER-NEW/F400-4.aspx looking at this cadence F400-4 for highs and mids just wondering what you guys think four ga. power ground 8ga. speaker wire i don't want to spend much over $135 thinking of running alpine speakers uncle had some in his suburban ouch that thing hurt my ears with the bass but i was able to hear the mids and highs and i liked the sound of them AND NO I AM NOT SPENDING $230 on a four channel audioque I would stay away from that amp if it was me. sounds like a marketing hype amp to me. 4g power inputs with 40 amps of fusing...8g speaker outputs? i understand the speaker outputs are excessive i won't run that big maybe 16 or 14 ga. fusing seems alright depending on how efficient it is and i believe that is the BIG ? 4 ga. kinda seems big too i think it would be fine with 8ga. the worst is i can't find any reviews saying anything good or bad Quote skar sk2500.1 0 gauge power and ground kunukonceptz alpine HUvxi65 components on BA gt-275new build log -> http://www.stevemeadedesigns.com/board/topic/150642-project-d-kon-deathcards-build-log/#entry2148821 2 x-15 sundowns singer alt, odyssey bat, and maxwell ultra caps Link to comment Share on other sites More sharing options...
MrSkippyJ Posted May 22, 2011 Report Share Posted May 22, 2011 http://www.audiosavings.com/products/4-Channel-Car-Amplifier/CADENCE-F400-4-1000-WATT-4-CHANNEL-CAR-AMPLIFIER-NEW/F400-4.aspx looking at this cadence F400-4 for highs and mids just wondering what you guys think four ga. power ground 8ga. speaker wire i don't want to spend much over $135 thinking of running alpine speakers uncle had some in his suburban ouch that thing hurt my ears with the bass but i was able to hear the mids and highs and i liked the sound of them AND NO I AM NOT SPENDING $230 on a four channel audioque I would stay away from that amp if it was me. sounds like a marketing hype amp to me. 4g power inputs with 40 amps of fusing...8g speaker outputs? i understand the speaker outputs are excessive i won't run that big maybe 16 or 14 ga. fusing seems alright depending on how efficient it is and i believe that is the BIG ? 4 ga. kinda seems big too i think it would be fine with 8ga. the worst is i can't find any reviews saying anything good or bad more than fine with 8g, 12g can handle 40 amps, so for a longer run 10g would be sufficient. I'm not saying the amp won't work, I have just personally had bad experiences with cheap amps (especially on mids and highs where you can hear lots of noises added to the system). Quote F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69 Link to comment Share on other sites More sharing options...
deathcards Posted May 22, 2011 Author Report Share Posted May 22, 2011 more than fine with 8g, 12g can handle 40 amps, so for a longer run 10g would be sufficient. I'm not saying the amp won't work, I have just personally had bad experiences with cheap amps (especially on mids and highs where you can hear lots of noises added to the system). yea i know but i guess i don't have a say with my cheap soundstormlabs lol i screwed myself over with it 40 amp fuse for 1000 watts rms @ 4 ohms i am getting about 300 and somtin Quote skar sk2500.1 0 gauge power and ground kunukonceptz alpine HUvxi65 components on BA gt-275new build log -> http://www.stevemeadedesigns.com/board/topic/150642-project-d-kon-deathcards-build-log/#entry2148821 2 x-15 sundowns singer alt, odyssey bat, and maxwell ultra caps Link to comment Share on other sites More sharing options...
Freshman6969 Posted May 22, 2011 Report Share Posted May 22, 2011 i run the cobalt 600.4 personally, and i love the way it pushes my doors, so clean gets em loud too Quote Legal TL scores145.6 on the dash sealed up in the low 40hz area with the port out145.5 on the dash sealed up @30hz with the port inless then 1k clamped on a 3.5k! Why would you EVER WANT flex?huh?...flex is what can make the lows lower and more air being pushed correct? My FeedbackJeep-BuildlogPT LOSER buildlog Link to comment Share on other sites More sharing options...
deathcards Posted May 22, 2011 Author Report Share Posted May 22, 2011 (edited) i crunched some numbers for the f400-4 yea its overrated but the zrs-c9 is pretty close to almost underrated i think Edited May 23, 2011 by deathcards Quote skar sk2500.1 0 gauge power and ground kunukonceptz alpine HUvxi65 components on BA gt-275new build log -> http://www.stevemeadedesigns.com/board/topic/150642-project-d-kon-deathcards-build-log/#entry2148821 2 x-15 sundowns singer alt, odyssey bat, and maxwell ultra caps Link to comment Share on other sites More sharing options...
deathcards Posted May 22, 2011 Author Report Share Posted May 22, 2011 i run the cobalt 600.4 personally, and i love the way it pushes my doors, so clean gets em loud too thx looks like the orion is getting some good rep Quote skar sk2500.1 0 gauge power and ground kunukonceptz alpine HUvxi65 components on BA gt-275new build log -> http://www.stevemeadedesigns.com/board/topic/150642-project-d-kon-deathcards-build-log/#entry2148821 2 x-15 sundowns singer alt, odyssey bat, and maxwell ultra caps Link to comment Share on other sites More sharing options...
white4d96 Posted May 22, 2011 Report Share Posted May 22, 2011 Got me looking at that Orion now... Quote Too many projects, too little time... Link to comment Share on other sites More sharing options...
deathcards Posted May 23, 2011 Author Report Share Posted May 23, 2011 Got me looking at that Orion now... i know two ppl say its good can get em for a good price too Quote skar sk2500.1 0 gauge power and ground kunukonceptz alpine HUvxi65 components on BA gt-275new build log -> http://www.stevemeadedesigns.com/board/topic/150642-project-d-kon-deathcards-build-log/#entry2148821 2 x-15 sundowns singer alt, odyssey bat, and maxwell ultra caps Link to comment Share on other sites More sharing options...
DannyB Posted May 23, 2011 Report Share Posted May 23, 2011 MB Quart 4.80 its in your price range and is 160wrms @2ohms. I have one running two sets of Polk Audio MM6501's and I'm impressed. Quote 07' 6.7 mega cab H&S mini maxx DPF/EGR delete 5" TBE 4.5" Fabtech 35" nittio trail grapplers 20" BMF novakane's Kenwood KIV-700 Rockford Fosgate T1500-1bdCP 2-MB Quart 4.80 3-Polk Audio MM6501 ProBox DMC212L-1000 144db @45hz Viper 5901 Link to comment Share on other sites More sharing options...
deathcards Posted May 23, 2011 Author Report Share Posted May 23, 2011 MB Quart 4.80 its in your price range and is 160wrms @2ohms. I have one running two sets of Polk Audio MM6501's and I'm impressed. i am running at 4 ohms though what are the fuse ratings on that 4.80? Quote skar sk2500.1 0 gauge power and ground kunukonceptz alpine HUvxi65 components on BA gt-275new build log -> http://www.stevemeadedesigns.com/board/topic/150642-project-d-kon-deathcards-build-log/#entry2148821 2 x-15 sundowns singer alt, odyssey bat, and maxwell ultra caps Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.