nCOMP1337 Posted June 13, 2011 Report Share Posted June 13, 2011 (edited) I had fun with this, was just curious how large it would be and it is quite big, I've been told T-Lines arent good with high amounts of power, but as I said this was just for fun, 1 SMD woofer cost moe than my entire setup, so no way would this come to fruition at least not by me This box has a lot of port, mainly due to its nearly 16 inches of mounting depth SUB: SMD / AA 15 Dual 2 Fs: 30.1 Qms: 4.99 Qes: 0.29 Qts: 0.27 Sd: 810cm^2 (half of actual port area, lol) Mounting Depth: 15.75 including stud Outer Diameter: 15.625 Cutout Diameter: 14.125 Sub Displacement: .24 cuft Weight: 73 pounds Box: Outer Dimension: 63 wide x 39 deep x 20 tall Inner Volume: 16.65 cuft after displacement (not accounting further bracing) Tuned to 29.7 Hz Port Length: 114 inches Port area: 256 inches (yes tons, not sure how that will affect its functioning within the T-Line) Now I think if this worked, 3 of these next to each other or stacked in a walled type of configuration (floor to ceiling) would just be cool, just cause I like T-Lines, for the money spent and functionality you would probably want, much easier way to go about a setup like this of course, I just wanted to see how it would look Inside View Complete with X ray Complete Since it will be a while before I can afford my sub, and I have my own design for a box done and too much free time due to no job, I just have a bit of fun trying to design boxes, I wish I knew more about 4th, 6th, and BP designs, those would be fun Edited June 13, 2011 by kynto Quote Link to comment Share on other sites More sharing options...
RAM_Designs Posted June 13, 2011 Report Share Posted June 13, 2011 You could do a classical t-line where you start out at 1.5-2x the sd of the sub and taper it down to 1x the sd. I've never seen anyone do 2x the sd all the way through the line. Quote Ryan Miskin - owner of RAM Designs I have my PM's turned off, please email at <script data-cfhash='f9e31' type="text/javascript"> /* */</script> 2200+ designs since March 2011... Link to comment Share on other sites More sharing options...
nCOMP1337 Posted June 13, 2011 Author Report Share Posted June 13, 2011 Yea, I could taper it, didnt think of that I wouldnt mind trying a taper, I dont know how that affects tuning though and how to calculate for that, is it sort of like horn theory, cause I dont know how to calculate that either Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.