Holdi Posted June 14, 2011 Report Posted June 14, 2011 Hi =) my name's Marc, I'm 19 years young and as you already read, i'm from Germany. This is my very first car and also my first install... Here are the components: - Car: Skoda Fabia 1.2 HTP 2005 (64 HP )(Skoda belongs to Volkswagen) - Headunit: Alpine CDA 105Ri - FS: DLS RS6a (had to be a flat system since the mounting depth is very small) - Amp: Audio System X-Ion 160.4 - JL Audio 13w6v2 (55L sealed enclosure) and a Dietz 1 Farad Cap... First of all, wiring: Then I cut a board for amp and cap and covered it adjusting: then back into the spare tire tub: then i cut a top plate since the original carpet was too instable finished: Now to the doors: including a "little" accident: temporary place for highs: Done! (At least for a few months )
Nine8SST Posted June 14, 2011 Report Posted June 14, 2011 Damn thats a good chunk you took out of your finger, did the foil do that? 1998 SS/T Ram Build Log - Kenwood KVT-514 and KNA-G510 Navigation - 2 DC Level 3 12" - Components??? - Sundown ??? - Sundown??? - Knu Konceptz - Second Skin Dampy Pro - XS D6500
AlexBryson Posted June 14, 2011 Report Posted June 14, 2011 If the install doesnt contain any of your blood, then it wasnt an in depth install! lol. Little joke we have at the shop b/c one of the guys is always gettin an injury on one our vehicles 2007 Mitsubishi Eclipse Spyder GS
Holdi Posted June 14, 2011 Author Report Posted June 14, 2011 Damn thats a good chunk you took out of your finger, did the foil do that? It happened when i tried to cut the... how dou you call those mats? If the install doesnt contain any of your blood, then it wasnt an in depth install! lol. Little joke we have at the shop b/c one of the guys is always gettin an injury on one our vehicles Trust me This was not the only time I hurt myself ------------------------------------------------------------------------- A short time later, there was a tickle in my fingers and my "old" setup wasn't good enough anymore... So i bought some new things The first thing was a new headunit, since I was tired of searching a song for hours... (Pioneer AVH P4200 DVD) A Second battery (Stinger SPV 35) installed: (including ugly-ass duct tape ) a couple of months later, the same thing happened again: tickle in my fingers I bought a second amp, a Mosconi 300.2 (1800W RMS @ 2ohms ) Then i modified and painted my top plate: again wiring: and at the end, two stylish pictures That's it up to now. The next thing i'm planning is to adjust the highs and to build doorboards... Also, i got a bunch of more caps which wait to get installed... Maybe, i also change the enclosure of the JL... Greetings from Germany, i hope you get along with my english
DingyChingy Posted June 14, 2011 Report Posted June 14, 2011 I bought a second amp, a Mosconi 300.2 (1800W RMS @ 2ohms ) that amp = 96 ZJ. http://www.stevemeadedesigns.com/board/topic/112237-poor-persons-zj-build/
BIGJOSE352 Posted June 14, 2011 Report Posted June 14, 2011 Schon eingerichtet,bro.... Did I say it right.....lol
TRTC360 Posted June 14, 2011 Report Posted June 14, 2011 that's a damn nice and clean setup '93 Firebird Formula V8 H/U- Kenwood eXcelon KDC-X395 Mids/Highs Amp- Hifonics ZXI80.4 Wiring-KNU RCA's, Speaker Wire, And Two Runs Of Trystar 1/0 G34 Red Top and a 180amp Ford Alternator www.youtube.com/TRTC360
blackrosetiger Posted June 14, 2011 Report Posted June 14, 2011 Just would like to point out that your amp is going to get warm sitting down in that tub with no air flow. easy to fix though Frozencpu.comcut a hole for one of these and evacuate that hot air! edit: never mind lol 1998 Plymouth Voyager (daily) Jensen VM9213 H.U. (I Know but I havent had any problems.... yet) 5.25" Factory -> Sound Stream SST5.2 6x9 Hifonics ZXi 693 -> Sound Stream SST6.9 Amp: Class D: Crescendo 3KWP (x2) Class A/B: Crescendo 1000C4 Sub: Almani S-7 10" (x6)
Holdi Posted June 15, 2011 Author Report Posted June 15, 2011 Ihr Englisch ist sehr gut nice build Thank you very much, ihr Deutsch auch Schon eingerichtet,bro.... Did I say it right.....lol Nearly, eingerichtet is normally used for "furnished" Just would like to point out that your amp is going to get warm sitting down in that tub with no air flow. easy to fix though Frozencpu.comcut a hole for one of these and evacuate that hot air! edit: never mind lol Had no heat problems when the amp was sitting in the tub... Now, there's a plate on top of the amps of course... Up to now, everythings fine, but i already thought of installing some fans
Recommended Posts
Archived
This topic is now archived and is closed to further replies.