94retta(219) Posted June 29, 2011 Report Share Posted June 29, 2011 Learn how to kerf and you can make a port better then areos. Areos are soo much easier tho Quote BUILD LOG Link to comment Share on other sites More sharing options...
ABC Posted July 2, 2011 Author Report Share Posted July 2, 2011 bump Quote Link to comment Share on other sites More sharing options...
bre2ts Posted July 2, 2011 Report Share Posted July 2, 2011 (edited) bump why are you bumping? you got answers to your questions people use aeroports for many reasons, save space, effiency and it can be claimed to be slightly louder (not to the human ear but in dbs) some even use it for looks. its usually more expensive if you have to use 6" ports because there about 40bucks for each set as for the circle to cut, parts express said 8 1/4 for the 6" port but that was too small for me i used 8 7/16 for a nice snug fit Edited July 2, 2011 by bre2ts Quote Feedback 1 | Feedback 2 you win some, you lose some Link to comment Share on other sites More sharing options...
ABC Posted July 2, 2011 Author Report Share Posted July 2, 2011 because i added a new question. i want to know how big of a cut out i have to make for a 6 inch aeroport to fit Quote Link to comment Share on other sites More sharing options...
bre2ts Posted July 2, 2011 Report Share Posted July 2, 2011 because i added a new question. i want to know how big of a cut out i have to make for a 6 inch aeroport to fit i already answered that but for future reference don't add it to the original post make it a new post in the thread cause it'll more than likely get overlooked Quote Feedback 1 | Feedback 2 you win some, you lose some Link to comment Share on other sites More sharing options...
fecupe2001 Posted July 2, 2011 Report Share Posted July 2, 2011 For me, an aeroport it´s louder than a slot port on the right application, BUT, kerf port is as loud as an aeroport, 2 different things, once again, depends on the application, sometimes a kerf works better than an aero and viceversa, my explorer it´s using slot while my swift is using "aeros" Quote I´m the SPL Gains topic creator!! wanna get louder?? check this: SPL Gains. Panamenian 2009 & 2010 & 2014 Bass Race 149.9 Champion! 2 15" subs and a 2K wired at 1 ohm, http://www.stevemeadedesigns.com/board/topic/167788-fecupe2001-2-15s-on-a-2k-video-on-page-3/ 8 Massive 15" subs and small power, http://www.stevemeadedesigns.com/board/topic/179296-fecupe2001s-8-15s-4th-order-bandpass-wall/ Link to comment Share on other sites More sharing options...
matt14 Posted July 2, 2011 Report Share Posted July 2, 2011 I used a 8 5/16 hole when I cut out for the 6" aeros. Had to lightly tap it in, but nice and snug Quote 2006 GMC YukonPioneer HU SHCA ran throughout Crescendo BC3500 One 18 AA Mayhem in a 4th order ZED Levithian 6 channel Rainbow Dual 6.5 comps ran Activehttp://www.stevemeadedesigns.com/board/topic/155628-matt14s-yukon-mayhem-in-a-4th-ordernew-amps-and-bats/page-3 Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.