Jump to content
Sonic Electronix

Recommended Posts

Posted

So for my new toy, a LS1 GTO, I need to add a little bump, but dont have experience with OEM headunits. Its a 04, hence the ls1, and I want to keep the blaupunkt radio/speakers. I sold my w6's with my mustang and the rest with the SR20, I now have my Accord stuff and some left over subs. Im putting in 2 10" RF P1's in the small trunk of the Goat but have no experience with inline converters and converting stock headunits to run RCA's and remote wires. Can someone let me know a good/cheap inline converter for this car (Im sure about any would work) and what else I need to do in order to get my radio ready to go with my subs. I dont know where to run the REM wire and the RCA's on the Goat. What I think I know is this: get an inline converter, use the rear speakers or speaker to power the converter, run those speaker(s) wires into the converter, then run the RCA's from the converter to the amp. For the remote wire, find a wire that has power when the car is on, and has 0 volts when the car is off. Pontiac owners unite! :popcorn:

1991 Accord

Audioque HDC3 15" (Copper)<--Sub

Audioque HDC3 15" (Copper)<--Backup Sub

Crescendo BC2000D<--Amp

Big 3

1/0 Knu<--Wiring

Eonon 3.5" DVD<--Headunit

Infinity Kappa Perfect<--Mids & Highs

2nd Stock 80Amp alt.

1991 Mustang 5.0

Too many mods

(Sold)

1991 240sx SR20 Red Top

Too many mods

(Sold)

2004 GTO

Just starting mods

Posted

It was easier and cheaper for my to put an aftermarket deck in my Monte. It gives you better power to your amp, and easier install of RCAs, and remote wire.

I used something like this to run my amp before i put the aftermarket deck in.

http://cgi.ebay.com/Speaker-RCA-Line-Level-Converter-Adaptor-High-Low-/360311861631?pt=LH_DefaultDomain_0&hash=item53e442b17f

Then there is this also.

http://cgi.ebay.com/4-Channel-RCA-Hi-Lo-Audio-Line-Level-Converter-Adapter-/360220150573?pt=LH_DefaultDomain_0&hash=item53decb4b2d

The easiest way i found to run a remote wire is straight to the fuse box.

Good luck, hope it helps

06 300C 5.7 Hemi

K&N CAI

JVC KW-AVX640 6.1" DVD

DC Audio 3.5k

6 DC Audio 8"s

6 cubes 8" aero port at 32hrtz

http://www.stevemeadedesigns.com/board/topic/183798-chrysler-300c-8-build/?p=2731834#entry2731834

Posted

Yeah its an 04' haha not a 94, ill have to change that. I saw your converter, but it looks really cheap, too cheap to put in a nice car like this one lol. But I have seen people do their Remote wire through the fuses, like the Stereo Aux fuse, Stereo fuse, SEO (stereo on) fuse, etc. This is not a bad idea, but its so flimsy. I might just have to do it that way though. I guess I just run it from the fuse to the amp.

1991 Accord

Audioque HDC3 15" (Copper)<--Sub

Audioque HDC3 15" (Copper)<--Backup Sub

Crescendo BC2000D<--Amp

Big 3

1/0 Knu<--Wiring

Eonon 3.5" DVD<--Headunit

Infinity Kappa Perfect<--Mids & Highs

2nd Stock 80Amp alt.

1991 Mustang 5.0

Too many mods

(Sold)

1991 240sx SR20 Red Top

Too many mods

(Sold)

2004 GTO

Just starting mods

Posted

Audiocontrol Lc2i

I second that, those things are awesome.

2009 Hyundai Accent GL

Alpine CDA 9884

Rockford Fosgate Wire

Rockford Fosgate 501bd

Soundstream 12 Reference

Hifonics Zeus ZXI 6410

Rockford Fosgate T1652

Rockford Fosgate T152

XBL: NW Livin Loud

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 755 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...