Supercharged DCs Posted July 13, 2011 Report Share Posted July 13, 2011 I understand. The facts lead me to believe it will be a damn good Deadner, that's for sure Quote Bassless once again. Can't seem to keep a system for more than a few weeks Saving for a '06 Nissan 350z, look for build around June 2012. Link to comment Share on other sites More sharing options...
tonedeaf Posted July 13, 2011 Author Report Share Posted July 13, 2011 (edited) and how big is each sheet? cause 140 bucks for 20 sheets doesnt seem like a good deal at all imo You have to remember, this shit is like 2 or 3 times bigger than damp pro. The spl tiles were meant for smaller areas and were thicker than damp pro. They were meant to fit in places like door skins and only have to do it with just a couple layers vs 7 or 8 so it's easier and faster. Jon can correct me if I'm wrong, but I believe this product is going for the same result. Less layers and time saved. Instead of doing 4 layers on your roof with damp pro, 1 or 2 layers of the alpha will reap te same results. Edited July 13, 2011 by tonedeaf Quote Link to comment Share on other sites More sharing options...
Dj_Scarface Posted July 13, 2011 Report Share Posted July 13, 2011 (edited) The 3/8" black foam stuff is OverKill Pro. I need to start labeling the products don't I? I will admit we had some confusion as well lol Nope just better pics on the site... LoL cause the 2 look the same. So which would go on first after damp pro? The lux liner pro or the over kill pro.... Edited July 13, 2011 by Dj_Scarface Quote Working on my 93' Ford Bronco rebuild:I have:pioneer AVH-P6500Infinity Reference 6032SI frontsInfinity Reference 6832CF Rears Crescendo CZ 6.5 kicks Crescendo 1100.4 (2) DC Audio LvL 4 M2's (1) Juicebox BlackcherryPiece together amps & wiringBout to get:Crescendo Amps Crescendo Mids Crescendo Tweets Sky High Car Audio Wire Rockford Fosgate 360.2 or .3 My Buildhttp://www.stevemeadedesigns.com/board/topic/97426-93-ford-bronco-rebuild-full-system-body-paint/ Link to comment Share on other sites More sharing options...
armykyle1 Posted July 13, 2011 Report Share Posted July 13, 2011 do you cover an entire area with this or just parts of various areas. Quote TEAM XS POWERTEAM HEAVY HERTZMy build- http://www.stevemeadedesigns.com/board/topic/194454-e46-bmw-build-pos/#entry2914134youtube- http://www.youtube.com/user/armykyle1big build starting Link to comment Share on other sites More sharing options...
Second Skin Rep Jon Posted July 13, 2011 Report Share Posted July 13, 2011 (edited) You have to remember, this shit is like 2 or 3 times bigger than damp pro. The spl tiles were meant for smaller areas and were thicker than damp pro. They were meant to fit in places like door skins and only have to do it with just a couple layers vs 7 or 8 so it's easier and faster. Jon can correct me if I'm wrong, but I believe this product is going for the same result. Less layers and time saved. Instead of doing 4 layers on your roof with damp pro, 1 or 2 layers of the alpha will reap te same results. Chances are you will need only one layer and not even need 100% coverage to control the vibrations with Alpha damp. Nope just better pics on the site... LoL cause the 2 look the same. So which would go on first after damp pro? The lux liner pro or the over kill pro.... Damplifier or Damplifier Pro. You always start out with a CLD. Once the vibrations are controlled you can add MLV (such as Luxury Liner or Luxury Liner Pro) to actually block the noise. do you cover an entire area with this or just parts of various areas. It will probably depend on the panel. Most installs will probably not warrant 100% coverage. Just like most any other CLD, as little as 25% of the panel needs to be covered. Edited July 13, 2011 by Second Skin Rep Jon Quote Have a question about Second Skin? E-Mail me! Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.