Jump to content
Sonic Electronix

Recommended Posts

The very first subwoofer enclosure made for home and studio use was the separate bass speaker for the Servo Statik 1, by New Technology Enterprises.[6] Designed as a prototype in 1966 by physicist Arnold Nudell and airline pilot Cary Christie in Nudell's garage, the design used a second winding around a custom Cerwin Vega 18-inch driver to provide servo control information to the amplifier, and it was offered for sale at $1795, some 40% more expensive than any other complete loudspeaker listed at Stereo Review.[6] In 1968, the two found outside investment and reorganized as Infinity.[6] The subwoofer was reviewed positively in Stereophile magazine's Winter 1968 issue as the SS-1 by Infinity. The SS-1 was reviewed very highly in 1970 by High Fidelity magazine.[6]

One of the first subwoofers was developed during the late 1960s by Ken Kreisel, the former president of the Miller & Kreisel Sound Corporation in Los Angeles. When Kreisel's business partner, Jonas Miller, who owned a high-end audio store in Los Angeles, told Kreisel that some purchasers of the store's high-end electrostatic speakers had complained about a lack of bass response in the electrostatics, Kreisel designed a powered woofer that would reproduce only those frequencies that were too low for the electrostatic speakers to convey.[7] Infinity's full range electrostatic speaker system that was developed during the 1960s also used a woofer to cover the lower frequency range that its electrostatic arrays did not handle adequately.

The first use of a subwoofer in a recording session was in 1973 for mixing the Steely Dan album Pretzel Logic when recording engineer Roger Nichols arranged for Kreisel to bring a prototype of his subwoofer to Village Recorders.[8] Further design modifications were made by Kreisel over the next ten years, and in the 1970s and 1980s by engineer John P. D'Arcy; record producer Daniel Levitin served as a consultant and "golden ears" for the design of the crossover network (used to partition the frequency spectrum so that the subwoofer would not attempt to reproduce frequencies too high for its effective range, and so that the main speakers would not need to handle frequencies too low for their effective range).

(copied from wikipedia)

haha!

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...