nativestacks Posted October 13, 2011 Author Report Share Posted October 13, 2011 you need to shorten your width ok, but its gonna be a ported box cuz i dont mess with sealed enclosures Quote Link to comment Share on other sites More sharing options...
Fennygolf Posted October 13, 2011 Report Share Posted October 13, 2011 you need to shorten your width ok, but its gonna be a ported box cuz i dont mess with sealed enclosures you need 5 to 8 cubes after displacement Quote Link to comment Share on other sites More sharing options...
CleanSierra Posted October 13, 2011 Report Share Posted October 13, 2011 I threw it in Torres and got 34 for width, and 22 height and 22 depth with good volume(5.21 cubes) with a 4.5 wide slot port. I get 17.71 sq in per cube, with a total of 92.25 inches of port. I got it tuned to a hair under 33 hz with a port length of 34 inches to achieve these numbers. Quote Im not the one you want to try to troll. Just a fyi for you. Link to comment Share on other sites More sharing options...
nativestacks Posted October 13, 2011 Author Report Share Posted October 13, 2011 you need to shorten your width ok, but its gonna be a ported box cuz i dont mess with sealed enclosures you need 5 to 8 cubes after displacement oh ok..i was told different by someone else..i was givin a design that was 6.5 cubes at 1.5" thick with a 5" wide port, cuz im trying to achieve mid 50s if possible either aq3500 or saz-3500 Quote Link to comment Share on other sites More sharing options...
Fennygolf Posted October 13, 2011 Report Share Posted October 13, 2011 I threw it in Torres and got 34 for width, and 22 height and 22 depth with good volume(5.21 cubes) with a 4.5 wide slot port. I get 17.71 sq in per cube, with a total of 92.25 inches of port. I got it tuned to a hair under 33 hz with a port length of 34 inches to achieve these numbers. there yeah go man grab those measurements and hit up Sampsonite on this forum and let him make you an encloser tell him i sent you Quote Link to comment Share on other sites More sharing options...
CleanSierra Posted October 13, 2011 Report Share Posted October 13, 2011 My attempt was just quick throwing numbers in and tweaking to get a decent volume and decent port area. you could certainly try to make bigger and throw more port area at it. I did the Torres in about 1 minute... Quote Im not the one you want to try to troll. Just a fyi for you. Link to comment Share on other sites More sharing options...
nativestacks Posted October 13, 2011 Author Report Share Posted October 13, 2011 I threw it in Torres and got 34 for width, and 22 height and 22 depth with good volume(5.21 cubes) with a 4.5 wide slot port. I get 17.71 sq in per cube, with a total of 92.25 inches of port. I got it tuned to a hair under 33 hz with a port length of 34 inches to achieve these numbers. there yeah go man grab those measurements and hit up Sampsonite on this forum and let him make you an encloser tell him i sent you sweet man and thanks to fennygolf and cleansierra..oh quick question..why the small box measurements?.. Quote Link to comment Share on other sites More sharing options...
CleanSierra Posted October 13, 2011 Report Share Posted October 13, 2011 I threw it in Torres and got 34 for width, and 22 height and 22 depth with good volume(5.21 cubes) with a 4.5 wide slot port. I get 17.71 sq in per cube, with a total of 92.25 inches of port. I got it tuned to a hair under 33 hz with a port length of 34 inches to achieve these numbers. there yeah go man grab those measurements and hit up Sampsonite on this forum and let him make you an encloser tell him i sent you sweet man and thanks to fennygolf and cleansierra..oh quick question..why the small box measurements?.. You dont wanna feed that sub 15 cubes of air.... Quote Im not the one you want to try to troll. Just a fyi for you. Link to comment Share on other sites More sharing options...
Fennygolf Posted October 13, 2011 Report Share Posted October 13, 2011 I threw it in Torres and got 34 for width, and 22 height and 22 depth with good volume(5.21 cubes) with a 4.5 wide slot port. I get 17.71 sq in per cube, with a total of 92.25 inches of port. I got it tuned to a hair under 33 hz with a port length of 34 inches to achieve these numbers. there yeah go man grab those measurements and hit up Sampsonite on this forum and let him make you an encloser tell him i sent you sweet man and thanks to fennygolf and cleansierra..oh quick question..why the small box measurements?.. an encloser is something that keeps the subwoofer under control if you give it too much air space it basically just like free ariing the thing it can do what ever it want except what u want it to do Quote Link to comment Share on other sites More sharing options...
nativestacks Posted October 13, 2011 Author Report Share Posted October 13, 2011 I threw it in Torres and got 34 for width, and 22 height and 22 depth with good volume(5.21 cubes) with a 4.5 wide slot port. I get 17.71 sq in per cube, with a total of 92.25 inches of port. I got it tuned to a hair under 33 hz with a port length of 34 inches to achieve these numbers. there yeah go man grab those measurements and hit up Sampsonite on this forum and let him make you an encloser tell him i sent you sweet man and thanks to fennygolf and cleansierra..oh quick question..why the small box measurements?.. You dont wanna feed that sub 15 cubes of air.... oh so the 6.5 cubes at 1.5" thick all around with the top baffle being 2.25in and a 5" wide slot port is not good? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.