412 CVX Posted October 22, 2011 Author Report Share Posted October 22, 2011 Looks good id lose the verticle 45s and use a horizontal one on bottom across from port. Just my opinion. Mite hit you up for a design for my 4 18s and see what you come up with true true. i guess if you wanted to go all out you could just add the horizontal 45 across the bottom and keep the vertical ones as well. i'd be up for doing 4 18's. let me know! thanks! Quote Just say no to Ground Pounder Customs. My temp system build log More box buildssome cars do over 170db with one sub, so clearly my two 12"s can do that in my car, with my knowledge too! look out bitches! I'm with captain stupid. Link to comment Share on other sites More sharing options...
412 CVX Posted October 22, 2011 Author Report Share Posted October 22, 2011 (edited) Here's the sketchup model if anybody wants to measure things themselves. Edited October 22, 2011 by 412 CVX Quote Just say no to Ground Pounder Customs. My temp system build log More box buildssome cars do over 170db with one sub, so clearly my two 12"s can do that in my car, with my knowledge too! look out bitches! I'm with captain stupid. Link to comment Share on other sites More sharing options...
CHEVY4X4BLAZER Posted October 22, 2011 Report Share Posted October 22, 2011 I really like that look. I wish I had 2 18s for this box. Hopefully I can get a pair around tax time. I like the huge port. Very good job. How many sheets of mdf would this take? Quote Link to comment Share on other sites More sharing options...
412 CVX Posted October 22, 2011 Author Report Share Posted October 22, 2011 I really like that look. I wish I had 2 18s for this box. Hopefully I can get a pair around tax time. I like the huge port. Very good job. How many sheets of mdf would this take? hahah a shit ton. hold up let me get a cutsheet made Quote Just say no to Ground Pounder Customs. My temp system build log More box buildssome cars do over 170db with one sub, so clearly my two 12"s can do that in my car, with my knowledge too! look out bitches! I'm with captain stupid. Link to comment Share on other sites More sharing options...
412 CVX Posted October 22, 2011 Author Report Share Posted October 22, 2011 (edited) [4] 38x32 [2] 27.75x32 [2] 27.75x38 [1] 25.5x19 [1] 25.5x2 [2] 10.75x27.75 with a 19.75x2 rectangle cut out of one corner(this is the L shaped piece) [4] 1.5 inch diameter dowels then use the scraps for the 45's Edited October 22, 2011 by 412 CVX Quote Just say no to Ground Pounder Customs. My temp system build log More box buildssome cars do over 170db with one sub, so clearly my two 12"s can do that in my car, with my knowledge too! look out bitches! I'm with captain stupid. Link to comment Share on other sites More sharing options...
412 CVX Posted October 22, 2011 Author Report Share Posted October 22, 2011 anybody that's good at math wanna figure out how many sheets this would take? i'm thinking like 4-5 Quote Just say no to Ground Pounder Customs. My temp system build log More box buildssome cars do over 170db with one sub, so clearly my two 12"s can do that in my car, with my knowledge too! look out bitches! I'm with captain stupid. Link to comment Share on other sites More sharing options...
CHEVY4X4BLAZER Posted October 22, 2011 Report Share Posted October 22, 2011 1 4'x8' sheet is 4608 square inches. That's as far as I'm going. LOL. just the 4 38"x32" boards (provided we could get every inch) would be 4864. Quote Link to comment Share on other sites More sharing options...
audiofanaticz Posted October 22, 2011 Report Share Posted October 22, 2011 box looks ok, but Im hating the port.. the port should be the width of the entire box (and not as tall), using 3 common wall Or it should be made the entire height of the box and use 2 common walls Putting the port right in the middle causes lots of dead air space and usually hurts numbers. Quote Link to comment Share on other sites More sharing options...
audiofanaticz Posted October 22, 2011 Report Share Posted October 22, 2011 IE: Your box is externally 38w So your port should be 36.5Wide by 5.25High, which comes out to 191.62 sq inches of port (vs the old 192 sq inches or port you currently have). So not only will you be making the box have less obstructions, you will be saving time not having to cut all the sides of the port, when you can just use the sides of the box, and have almost idenical SQ inches of port, same port length, same port tuning, and saving wood, and cutting time. Quote Link to comment Share on other sites More sharing options...
CHEVY4X4BLAZER Posted October 22, 2011 Report Share Posted October 22, 2011 IE: Your box is externally 38w So your port should be 36.5Wide by 5.25High, which comes out to 191.62 sq inches of port (vs the old 192 sq inches or port you currently have). So not only will you be making the box have less obstructions, you will be saving time not having to cut all the sides of the port, when you can just use the sides of the box, and have almost idenical SQ inches of port, same port length, same port tuning, and saving wood, and cutting time. Good input. Do you also design boxes? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.