ChevyBoy95 Posted November 1, 2011 Report Posted November 1, 2011 Have been thinking about a new box for my sub. Ideas have been -1 12in flared aero in 6ish cubes tuned to 34(or 33) -140 sqin of port tuned to 35 (pic below) 6.6 cubes would i run into issues with this design (PORT LOCATION!!!!) Quote Best Score to Date : 160.5 dB Outlaw (47Hz)[4 XM 15's & 2 Taramps Bass 12k's] BL : http://www.stevemeadedesigns.com/board/topic/147800-chevyboy95s-4-15s-7krms-wall-1533-db-on-half-power/YouTube: http://www.youtube.com/hitemwiththeflex/
ChevyBoy95 Posted November 2, 2011 Author Report Posted November 2, 2011 TTT Quote Best Score to Date : 160.5 dB Outlaw (47Hz)[4 XM 15's & 2 Taramps Bass 12k's] BL : http://www.stevemeadedesigns.com/board/topic/147800-chevyboy95s-4-15s-7krms-wall-1533-db-on-half-power/YouTube: http://www.youtube.com/hitemwiththeflex/
duff_thrust Posted November 2, 2011 Report Posted November 2, 2011 Can't really see it causing any issues with the port this way. 140 sq in of port is pretty efficient for a single 18 but eh it probably won't cause any issue either. run that sh** Quote
ChevyBoy95 Posted November 2, 2011 Author Report Posted November 2, 2011 Can't really see it causing any issues with the port this way. 140 sq in of port is pretty efficient for a single 18 but eh it probably won't cause any issue either. run that sh** 140sq in is on the up side of port area for an 18, 21sq in per cube. Quote Best Score to Date : 160.5 dB Outlaw (47Hz)[4 XM 15's & 2 Taramps Bass 12k's] BL : http://www.stevemeadedesigns.com/board/topic/147800-chevyboy95s-4-15s-7krms-wall-1533-db-on-half-power/YouTube: http://www.youtube.com/hitemwiththeflex/
Purplehaze Posted November 2, 2011 Report Posted November 2, 2011 Looks good! Only thing I see is w the port round over inside the box, looks a little restricting maybe? Should get down pretty good though! Good luck! Quote Kickin' Cruiser Seller Feedback Stage 3 Dash, Door Panels,4th Order wall 4 - 15'son a DC 5.0K 2 DC 5.0K'sSolo X 15 (v.2) Sub Build
kbsmoker Posted November 2, 2011 Report Posted November 2, 2011 looks good. might need a brace in the center of the port closest to the sub hole or it could flex even with fiberglass Quote www.dcsoundlab.comyoutube video's kbsmoker2011 MECAOH AS3 Champ 147.5OH DB2 Champ 125.9WF AS3 3rd 147.3WF DB3 2nd 128.3 SystemPioneer AVH-P4300DVD2 sets Fusion Encounter 6.5 componentson Crunch Ground Pounder 1200.418" DC NEO on DC 5.0KKnukonceptz 1/0 through outBig 3 all 1/0XS D6500under hood D3100 in the backMechman 270....rebuilt by Ohio Generator
ChevyBoy95 Posted November 2, 2011 Author Report Posted November 2, 2011 looks good. might need a brace in the center of the port closest to the sub hole or it could flex even with fiberglass yea, i didnt add all bracing, there will be about 1/3 of a cube of braing, lots of dowels most likely. and the end of the port on the inside it will be different, did that for looks when messing with sketchup Quote Best Score to Date : 160.5 dB Outlaw (47Hz)[4 XM 15's & 2 Taramps Bass 12k's] BL : http://www.stevemeadedesigns.com/board/topic/147800-chevyboy95s-4-15s-7krms-wall-1533-db-on-half-power/YouTube: http://www.youtube.com/hitemwiththeflex/
kbsmoker Posted November 2, 2011 Report Posted November 2, 2011 cool other than that Quote www.dcsoundlab.comyoutube video's kbsmoker2011 MECAOH AS3 Champ 147.5OH DB2 Champ 125.9WF AS3 3rd 147.3WF DB3 2nd 128.3 SystemPioneer AVH-P4300DVD2 sets Fusion Encounter 6.5 componentson Crunch Ground Pounder 1200.418" DC NEO on DC 5.0KKnukonceptz 1/0 through outBig 3 all 1/0XS D6500under hood D3100 in the backMechman 270....rebuilt by Ohio Generator
ChevyBoy95 Posted November 2, 2011 Author Report Posted November 2, 2011 idea above is a no go, got a big no on port location. so this is my new idea. Quote Best Score to Date : 160.5 dB Outlaw (47Hz)[4 XM 15's & 2 Taramps Bass 12k's] BL : http://www.stevemeadedesigns.com/board/topic/147800-chevyboy95s-4-15s-7krms-wall-1533-db-on-half-power/YouTube: http://www.youtube.com/hitemwiththeflex/
matt402 Posted November 2, 2011 Report Posted November 2, 2011 idea above is a no go, got a big no on port location. so this is my new idea. yes. i was gunna suggest this type of port. can u move the sub to the bottom of the baffle tho? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.