turnin26s Posted November 17, 2011 Report Posted November 17, 2011 just got my dd-1 and found my headunit clipping point fine with is a pioneer 4200, clipped at 40 so i keep it on 39, my problem is when i try to set the gains on my jl 300/4v2 and jl 1000v2 the 1hz and 40hz lights wont come on, ive followed the instructions to a T, idk what im doing wrong???? please help!!!! Quote
gally Posted November 17, 2011 Report Posted November 17, 2011 did you read the instructions? Quote 2010 Chevrolet Cruze Radio --- pioneer mvh-200vbt Front/back --- alpine type s 6.5" Sub Control --- Pac LC1 Sub Amp --- GZPA 1.4K Sub --- GZNW 15XSPL D1 Battery - GZBP 12.2500X
Mario928 Posted November 17, 2011 Report Posted November 17, 2011 (edited) Explain how you are setting the gains or how you are detecting distortion. Maybe you are doing something wrong. Edited November 17, 2011 by Mario928 Quote Build Under Construction Head Unit = Kenwood DDX514 Amps = Kicker 750.1, Going to install Sundown 1500D v3 and Sundown 125.4 Battery = XS D3400 Wires = Kicker RCA's, 0 Gauge street wire and Stinger Mids and Highs = Stock Sub= Kicker L7 12" Alternator = 220 Mechman Sound Deadner= Fatmat and Stinger Road Kill
turnin26s Posted November 17, 2011 Author Report Posted November 17, 2011 did you read the instructions? yea read them prolly 6 times lol it worked fine when i did the headunit, just not with the amps... Quote
turnin26s Posted November 17, 2011 Author Report Posted November 17, 2011 Explain how you are setting the gains or how you are detecting distortion. Maybe you are doing something wrong. i turn the headunit to 39, turn it on the correct track, stick the red probe in the positive and clamp the other part on the amp ground wire, then play the track and it wont detect the hz, the signal light comes on tho, and then i turn the gain up and it will read distortion but the 40hz light never came on or 1hz when i did the full range amp Quote
Mario928 Posted November 17, 2011 Report Posted November 17, 2011 (edited) Explain how you are setting the gains or how you are detecting distortion. Maybe you are doing something wrong. i turn the headunit to 39, turn it on the correct track, stick the red probe in the positive and clamp the other part on the amp ground wire, then play the track and it wont detect the hz, the signal light comes on tho, and then i turn the gain up and it will read distortion but the 40hz light never came on or 1hz when i did the full range amp You need to turn your crossover(HZ) all the way up. Edited November 17, 2011 by Mario928 Quote Build Under Construction Head Unit = Kenwood DDX514 Amps = Kicker 750.1, Going to install Sundown 1500D v3 and Sundown 125.4 Battery = XS D3400 Wires = Kicker RCA's, 0 Gauge street wire and Stinger Mids and Highs = Stock Sub= Kicker L7 12" Alternator = 220 Mechman Sound Deadner= Fatmat and Stinger Road Kill
turnin26s Posted November 17, 2011 Author Report Posted November 17, 2011 Explain how you are setting the gains or how you are detecting distortion. Maybe you are doing something wrong. i turn the headunit to 39, turn it on the correct track, stick the red probe in the positive and clamp the other part on the amp ground wire, then play the track and it wont detect the hz, the signal light comes on tho, and then i turn the gain up and it will read distortion but the 40hz light never came on or 1hz when i did the full range amp You need to turn your crossover(HZ) all the way up. i did turn it all the way up on the both when i did each, i turned off the infrasonic filter 2 Quote
Ray Posted November 17, 2011 Report Posted November 17, 2011 Play -5db 1000hz and try it again. Quote 2008 California state record holder 157.2 Bassrace2009 California state record holder 157.0 BassraceRollin 50's 158.7db2009 King of Cali Bassrace2009 USACi score 160.5 @ 42hz
turnin26s Posted November 17, 2011 Author Report Posted November 17, 2011 Play -5db 1000hz and try it again. i did, i tried track 4 and 6 1000hz and same result and did 5 and 3 for 40hz Quote
turnin26s Posted November 17, 2011 Author Report Posted November 17, 2011 im gonna try it again tom and see what happens, any more suggestions i would really and i mean really appreciate it guys, thanks Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.