Jump to content
Sonic Electronix

Need help finding seatbelt bolt location!


Recommended Posts

Firstly, this is my first post on the SMD forums. :woot:

Anyway, I just got done with my build in 2000 Chevy S10 Blazer 2 door and have everything except one thing back in: the rear seatbelts!

I have them bolted in to the top of the car under the headliner, but cannot for the life of me figure out where they get bolted in to the floor!

Has ANYONE taken out/put back in the REAR seatbelts of an TWO door S10 Blazer that knows where they bolt in?!?!

Help would be SOO appreciated.

Pioneer DEH-P7200HD

(2)Rockford Fosgate P3D4-15's

AQ-1200D

Hifonics 55.4

Polk Audio db components & 6x9's

Duralast Gold starter

GNB Sprinter 370 accessory

Link to comment
Share on other sites

are you talking about the belt or the lock part?

bottom of the strap side are next to the seat, clip bolts to the seat leg itself

Edited by EBW

Kenwood KIV-BT900

Front Stage

RF 400-4 Runs off dedicated 4 awg ofc

RE 6.5 125.5.

Lanzar Max Pro 6.5

Boston S60 6.5 components

Rear

Soundstream BX-15

Boston S60 6.5 components

4x Sundown SA8 v1.5

Crescendo BC3500D

2.4 net 28hz

4 runs of 0 gauge

Big 3

HC2400

700ca up front

Singer 350 Amp Alt

No deadener :/

Scytek Galaxy Alarm

Link to comment
Share on other sites

Thanks for the fast reply, I was going INSANE!

I'm talking about the end of the belt; the L-shaped bracket.

That bolts right to the leg of the seat?

Pioneer DEH-P7200HD

(2)Rockford Fosgate P3D4-15's

AQ-1200D

Hifonics 55.4

Polk Audio db components & 6x9's

Duralast Gold starter

GNB Sprinter 370 accessory

Link to comment
Share on other sites

12- DC Audio m2Lvl3 12's1- Hertz HSK3 way2- DC5K's2- ZX350.42- Stinger SP1500D batteries in rear3- runs of 1/0ga. to the rearTeam DC Audiodc-banner.jpgdcsoundlab.com

Quality is all in how you take pictures ;) I have plenty of projects that look WAY better on camera then in person :D

crazy to fit so many in so little. Reminds me of some of the porns I've seen?

Link to comment
Share on other sites

Hahaha not quite. Those appear to be K5 blazers, which are quite a bit older than the S10's.

But thanks man!

Pioneer DEH-P7200HD

(2)Rockford Fosgate P3D4-15's

AQ-1200D

Hifonics 55.4

Polk Audio db components & 6x9's

Duralast Gold starter

GNB Sprinter 370 accessory

Link to comment
Share on other sites

Thanks for the fast reply, I was going INSANE!

I'm talking about the end of the belt; the L-shaped bracket.

That bolts right to the leg of the seat?

the top is near headliner the bottom is at the same level at the seat all behind the plastic, as in the part you sit on, the clip/ lock part is on the leg to the floor

Edited by EBW

Kenwood KIV-BT900

Front Stage

RF 400-4 Runs off dedicated 4 awg ofc

RE 6.5 125.5.

Lanzar Max Pro 6.5

Boston S60 6.5 components

Rear

Soundstream BX-15

Boston S60 6.5 components

4x Sundown SA8 v1.5

Crescendo BC3500D

2.4 net 28hz

4 runs of 0 gauge

Big 3

HC2400

700ca up front

Singer 350 Amp Alt

No deadener :/

Scytek Galaxy Alarm

Link to comment
Share on other sites

Thanks for the fast reply, I was going INSANE!

I'm talking about the end of the belt; the L-shaped bracket.

That bolts right to the leg of the seat?

the top is near headliner the bottom is at the same level at the seat, as in the part you sit on, the clip/ lock part is on the leg

So the clip is right on the leg? No wonder I couldn't find the bolt hole!

Do you have to fold the seats down to access that part of the leg?

Pioneer DEH-P7200HD

(2)Rockford Fosgate P3D4-15's

AQ-1200D

Hifonics 55.4

Polk Audio db components & 6x9's

Duralast Gold starter

GNB Sprinter 370 accessory

Link to comment
Share on other sites

Kenwood KIV-BT900

Front Stage

RF 400-4 Runs off dedicated 4 awg ofc

RE 6.5 125.5.

Lanzar Max Pro 6.5

Boston S60 6.5 components

Rear

Soundstream BX-15

Boston S60 6.5 components

4x Sundown SA8 v1.5

Crescendo BC3500D

2.4 net 28hz

4 runs of 0 gauge

Big 3

HC2400

700ca up front

Singer 350 Amp Alt

No deadener :/

Scytek Galaxy Alarm

Link to comment
Share on other sites

Kenwood KIV-BT900

Front Stage

RF 400-4 Runs off dedicated 4 awg ofc

RE 6.5 125.5.

Lanzar Max Pro 6.5

Boston S60 6.5 components

Rear

Soundstream BX-15

Boston S60 6.5 components

4x Sundown SA8 v1.5

Crescendo BC3500D

2.4 net 28hz

4 runs of 0 gauge

Big 3

HC2400

700ca up front

Singer 350 Amp Alt

No deadener :/

Scytek Galaxy Alarm

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 536 Guests (See full list)

×
×
  • Create New...