Miguels Posted November 23, 2011 Report Posted November 23, 2011 you said you blew them in purpose then ask how to wire them to not blow them again. well just dont do the same thing you did to blow them in the first place Quote my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/
STEvil Posted November 23, 2011 Report Posted November 23, 2011 What a crappy company.. they have ripoff simpsons characts on their web page, lol. http://www.midtownsounds.com/i433md-sw8001d.html 1800RMS @ 1 ohm looks to be your best. 1200w RMS @ 2ohm if you want to play it safe... now you just need to tell us if they're putting single 2 ohm coils on each sub or dual 2 ohm coils on each... Quote MickyMcD - "Capable of making some serious trouser flapping volumes at where's-my-testicles frequencies, the Servo-Drives used to be fairly jaw dropping..." Any time you have have a power wire next to your frame put some rubber hosing (or cut up an innertube) around it. The wire is bound to wiggle (due to driving or flex) and the casing will eventually wear through. Hammerdown... 1% no links to outside websites, business related FB/YT pages allowed.
illusionENT7151 Posted November 23, 2011 Author Report Posted November 23, 2011 dual 2 ohm What a crappy company.. they have ripoff simpsons characts on their web page, lol. http://www.midtownso...md-sw8001d.html 1800RMS @ 1 ohm looks to be your best. 1200w RMS @ 2ohm if you want to play it safe... now you just need to tell us if they're putting single 2 ohm coils on each sub or dual 2 ohm coils on each... Quote Dwallace IllusionEntertainment http://a4.sphotos.ak.fbcdn.net/hphotos-ak-snc6/182034_194786540548771_194777733882985_638762_2070667_n.jpg
siccostyle Posted November 23, 2011 Report Posted November 23, 2011 What do the subs that you have look like? Can you post a pic? Quote 01 2dr ExploderBuild log2 18" DC Level 6's (M3's)DC 10k5 XS d3100's, DC 390 alt100' shok ofc cable Team ShokTEAM SUB SONIC ADDICTION
illusionENT7151 Posted November 23, 2011 Author Report Posted November 23, 2011 i'll take a pic as soon as they come out of FI. i should be getting them no later than next week. Quote Dwallace IllusionEntertainment http://a4.sphotos.ak.fbcdn.net/hphotos-ak-snc6/182034_194786540548771_194777733882985_638762_2070667_n.jpg
STEvil Posted November 24, 2011 Report Posted November 24, 2011 (edited) dual 2 ohm means you can wire them as 0.5, 2, or 8 ohms. Probably best to wire at 2 ohms. Series the coils on each sub then parallel the subs to the amp. Edited November 24, 2011 by STEvil Quote MickyMcD - "Capable of making some serious trouser flapping volumes at where's-my-testicles frequencies, the Servo-Drives used to be fairly jaw dropping..." Any time you have have a power wire next to your frame put some rubber hosing (or cut up an innertube) around it. The wire is bound to wiggle (due to driving or flex) and the casing will eventually wear through. Hammerdown... 1% no links to outside websites, business related FB/YT pages allowed.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.