Skullz Posted November 28, 2011 Report Posted November 28, 2011 By combining all of the alts you won't strain your stock one anymore than the mechman alts will be, your stock won't be capable of 100% duty cycle like the mechman alts will so it will eventually fail though. To wire them up connect all positives together and all grounds together in parallel so your only getting 12v cause if you wire them in series you'll increase the voltage and risk blowing everything. Quote 01 Ford focus ZX3 Pioneer AVH-X491BHS PPI PC 4800.2 Morel Maximo 6.5" x2
10rohitdudeja Posted November 28, 2011 Author Report Posted November 28, 2011 So your alt should be made to power those accessories and a little bit more and the batteries will hold the reserve for you so you can ram on it and not have to over work everything else. i calculated all the thing that how much power my audio and visual devices sucks and i found that (5) D3100s gives me the power i needed! one of my friend told me that "if i make compatibility between batteries amp and alternator amp i would take best results" thats why i m trying to find out the rms amp of D3100s Quote RDD *ROHIT DUDEJA DESIGNS*
Skullz Posted November 28, 2011 Report Posted November 28, 2011 (edited) This should help you to understand a little better on what you'll need to power your system with. Edited November 28, 2011 by Skullz Quote 01 Ford focus ZX3 Pioneer AVH-X491BHS PPI PC 4800.2 Morel Maximo 6.5" x2
dugee81 Posted November 28, 2011 Report Posted November 28, 2011 fairly simple youll want to get a external voltage regulator for the mechman alternators. having one run of 1/0 or better is good, but you can certainly add more for less resistance. be sure to do the big 3. Quote 200a alt. by Excessive Amperage hc800 under hood & 2 Deka 9a31 in rear 1/0awg + big 3 SAZ 3000D HDC3 18" @ 2 ohm
10rohitdudeja Posted November 28, 2011 Author Report Posted November 28, 2011 fairly simple youll want to get a external voltage regulator for the mechman alternators. having one run of 1/0 or better is good, but you can certainly add more for less resistance. be sure to do the big 3. how much amp fuse i wan't? for (5) D3100s Quote RDD *ROHIT DUDEJA DESIGNS*
splzx3 Posted November 28, 2011 Report Posted November 28, 2011 300 So ur going to use the mechman alt with the Oem alt on the same belt but u don't want to hook up the new alts to the Oem battery? Are u runing a 14 or 16 volt system? If not all this is a huge waste of tym and part/money Quote ________________________________________________________________________ deepsilencer, on 22 Aug 2011 - 17:32, said: splzx3, on 22 Aug 2011 - 17:27, said: i had my fun on one of his videos...till he blocked me then i got my mother into it lol after her he closed the comments xD lol your mom is a G! WTF, I never thought I'd have a conversation about cross dressers and trans-genders on a car audio forum.
10rohitdudeja Posted November 28, 2011 Author Report Posted November 28, 2011 is this wiring diagram is right or wrong? correct me if i am wrong! Quote RDD *ROHIT DUDEJA DESIGNS*
10rohitdudeja Posted November 28, 2011 Author Report Posted November 28, 2011 (edited) 300 So ur going to use the mechman alt with the Oem alt on the same belt but u don't want to hook up the new alts to the Oem battery? Are u runing a 14 or 16 volt system? If not all this is a huge waste of tym and part/money yaa i wan't to use my mechman alternator with my factory alternator on the same belt and i don't wan't to hook up the mechman alts to the factory battery because i don't wan't to use my fatory battery for my system because i don't wan't to take strain on factory accessories and battery, factory battery will only used to power the factory accessories not to my system! and i don't know the voltage because i don't install the system yet! even i don't unbox my devices but i have all the things that i wan't to hook up in my car! i wan't seprate power house for my system! Edited November 28, 2011 by 10rohitdudeja Quote RDD *ROHIT DUDEJA DESIGNS*
bassahaulic Posted November 28, 2011 Report Posted November 28, 2011 Whats so hard to understand people? He doesn't want his stereo being electrically wired to his factory wiring so that there isn't any strain on the factory equipment. I'd love to able to do this! Sir, your diagram is correct. I would recommend though, if you can run a higher voltage like 16v. More efficient for amps and more power. :-) Quote
10rohitdudeja Posted November 28, 2011 Author Report Posted November 28, 2011 Whats so hard to understand people? He doesn't want his stereo being electrically wired to his factory wiring so that there isn't any strain on the factory equipment. I'd love to able to do this! Sir, your diagram is correct. I would recommend though, if you can run a higher voltage like 16v. More efficient for amps and more power. :-) thaks for recommend my diagram! i wan't some more help like how much amp output alternator i wan't for (5) D3100s and how much D3100 amp have? Quote RDD *ROHIT DUDEJA DESIGNS*
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.