Jump to content
Second Skin Audio

If You Want Enclosure Plans Then Here Ya Go!


andym85

Recommended Posts

Ya I understand about the turbulance. I too thought that Orion only showed plans for a sealed box however after recieving the speaker and book for it I discovered that they do have plans for a ported box and I don't remember what size it was I wanna say that it was 2.7cf (before displacement) with a single 4 inch round port , or something close to that.

And actually the Qts is .37 on my peticular sub which is the 12.4 model. So maybe this will change things quite a bit. I have found lots of info about the Thiele/small Parameters and what they mean and how to do the equations to figure out how the driver wants to perform so I will educate myself so I can do this on my own later on down the road but I really appreciate all your help and knowledge. :)

Hey I just checked and the box dimensions they showed ended up being 1.96cf for a ported 12 before displacement :huh:

Link to comment
Share on other sites

by any chance you can od a 4th order bandpass? the max specs are 14H 32W 28D i need the port and towards the rear deck like this one

its for 2 audioque 12's on 2 hk401sx's(later down the road 2 2200.1d by audioque) in a 97 nisaan maxima tuned to 35hz

Posted Image

Posted Image

http://www.cardomain.com/ride/3042878

TEAM DEADLY HERTZ

"GET LOUD OR DIE TRYIN"only the loudest will survive.

Link to comment
Share on other sites

by any chance you can od a 4th order bandpass? the max specs are 14H 32W 28D i need the port and towards the rear deck like this one

its for 2 audioque 12's on 2 hk401sx's(later down the road 2 2200.1d by audioque) in a 97 nisaan maxima tuned to 35hz

that is a really clever setup!!

but im not really confortable with doing 4th order bp yet...i just recently (like a week or so ago) found all of the equations and shit for bandpasses and have been working with them since, so until i get confortable with them im just gonna stick with ported....sorry :(

i likes me some audio stuff...

Link to comment
Share on other sites

hello!

i got a pretty little LMS Ultra 15 along with a vfl 200.1 in my closet, so roughly 3-3.5k rms

going into a 98 escort wagon, either sub up port back or sub back+port back is fine, or whatever you think would be best

Max dimensions

36" Wide

22" deep leaves 4-5" from hatch for port to breathe

height is not very limited but if its below 17 cool, it would go under a tarp but dont design around this

i sent you a pm before i found this so sorry for the pm

Thanks Matt

bumping for you to see dimensions if your not too busy

15" LMS Ultra

AB VFL 200.1 3kw+ rms@ 1 ohm <-- 500.1 in near furture

3.5 cubes at 34 hertz

2 Exide Orbital's

200 Amp EA Alt

125 sq ft BXT

Link to comment
Share on other sites

crazyforhertz

sorry its taking so long for yours, but how many do u want, 3 or 4?

ratbass1998

Posted Image

Posted Image

bippimpin91

Posted Image

Posted Image

jcoleman134

Posted Image

Posted Image

sick96vtecaccord

have you tried looking at their site? b/c they have specs and cut lists on there

http://www.mtx.com/caraudio/products/manua...nstall/subs.cfm

ducttap123

thats pretty much what i get....i get 1.85cubes tuned at 37.2hz...so we are pretty damn close to one another

amalan

Posted Image

Posted Image

i likes me some audio stuff...

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...