TLSF150 Posted December 7, 2011 Report Posted December 7, 2011 I have a 2000 F150 Ext cab with 2 Memphis PR12s in a sealed box under the back seat.. Issue is I think the box is too small ( I measured it out to be like .6-.7 Cubes per chamber) So my plan is to build a ported box for 1 of the subs but im new to all this so I just wanna get some input on how many cubes I need, and what to tune it to.. This is what I got so far by reading what I can find on the internet.. Suggestions???
TLSF150 Posted December 7, 2011 Author Report Posted December 7, 2011 Just went and picked up a 4x8 sheet of 3/4 MDF.. (Which BTW is alot more expensive than I was expecting lol) Anyway this is my first box build and im ready to build this thing!!! If you guys have ANY suggestions please let me know before its to late..
loudNlow87 Posted December 7, 2011 Report Posted December 7, 2011 Is this suppose to be a basic slot port box? On the side or middle? '11 Jeep Patriot New Build Head Unit: Pioneer AVH-P3200DVD Front: Massive CK69 Components Front Amp: Massive NX2 Rears: Infinity Kappa's Subs: 8 Sundown SA-8 v2's Sub Amp: AB 450.1 XS D3100 Come on 150!
TLSF150 Posted December 8, 2011 Author Report Posted December 8, 2011 Yeah its just a basic slot port box.. this is my first build so I wanna start simple.. The plan is to have the box sitting in the middle of my back seat 25 high 18 wide and 16 deep with the port at the bottom firing toward the windsheild and the sub also firing forward above the port..
TLSF150 Posted December 8, 2011 Author Report Posted December 8, 2011 So is this design okay.. I'm guessing since no one had anything bad to say its alright?
Recommended Posts
Archived
This topic is now archived and is closed to further replies.