Bluedevil Posted December 24, 2011 Report Posted December 24, 2011 Where could i get a 6in. precision aero port and how far does the port have to be from the inside enclosure wall??? Thanks ahead for helping ...and Happy Holidays... Quote
OrionStang Posted December 24, 2011 Report Posted December 24, 2011 I got a complete, brand new 6" PPI port. Might be willing to part with it. I wouldn't have the port any closer than 4" from the inside of the box, although 6" would be ideal. Quote SMD Super Seller My Feedback Thread
OrionStang Posted December 24, 2011 Report Posted December 24, 2011 I got a complete, brand new 6" PPI port. Might be willing to part with it. I wouldn't have the port any closer than 4" from the inside of the box, although 6" would be ideal. i heard that its supposed to be the same distance away from wall as the diameter of the port. but that just what i heard. Now read the bold part again. Yes the diameter and distance the same is best, but a couple inches short won't kill it. Quote SMD Super Seller My Feedback Thread
Bluedevil Posted December 24, 2011 Author Report Posted December 24, 2011 I got a complete, brand new 6" PPI port. Might be willing to part with it. I wouldn't have the port any closer than 4" from the inside of the box, although 6" would be ideal. Do you got a pic of the port? and right now how i see it the port would be 4 inches from inner wall Quote
412 CVX Posted December 24, 2011 Report Posted December 24, 2011 Where could i get a 6in. precision aero port and how far does the port have to be from the inside enclosure wall??? Thanks ahead for helping ...and Happy Holidays... New you can get them from parts express, i believe. what's with the funky colors? Quote Just say no to Ground Pounder Customs. My temp system build log More box buildssome cars do over 170db with one sub, so clearly my two 12"s can do that in my car, with my knowledge too! look out bitches! I'm with captain stupid.
OrionStang Posted December 24, 2011 Report Posted December 24, 2011 I got a complete, brand new 6" PPI port. Might be willing to part with it. I wouldn't have the port any closer than 4" from the inside of the box, although 6" would be ideal. Do you got a pic of the port? and right now how i see it the port would be 4 inches from inner wall Sure, give me a minute. Quote SMD Super Seller My Feedback Thread
OrionStang Posted December 24, 2011 Report Posted December 24, 2011 Brand new, but I don't know where the original box is. Wife probably used it to ship xmas gifts. Quote SMD Super Seller My Feedback Thread
gally Posted December 24, 2011 Report Posted December 24, 2011 hey orion...does aero ports sound better than slot ports? Quote 2010 Chevrolet Cruze Radio --- pioneer mvh-200vbt Front/back --- alpine type s 6.5" Sub Control --- Pac LC1 Sub Amp --- GZPA 1.4K Sub --- GZNW 15XSPL D1 Battery - GZBP 12.2500X
OrionStang Posted December 24, 2011 Report Posted December 24, 2011 Haven't heard enough aero setups to answer that accurately. When I used aero's (one time), the sound was very clean with less than ideal port area. Quote SMD Super Seller My Feedback Thread
Bluedevil Posted December 24, 2011 Author Report Posted December 24, 2011 Brand new, but I don't know where the original box is. Wife probably used it to ship xmas gifts. Whats the difference between ppi ports and precision aero ports? wht payment do u accept? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.