Is this box specs okay for my two 15xl's?

[nosho47]

I already did cut it but i figured i wont be able to use that since it tapers up a little... How would i get the measurement for that? i havent had any time to play with the calculator or take more measurements cause i'm pretty busy at work.

[SouthDakota]

This is prolly a new noob question but where did you find a box caculator?

[Lbox88]

This is prolly a new noob question but where did you find a box caculator?

link to Torres box calc in my sig, one of the best ones you will ever find.

[jakobebassbudds]

in my sonoma i took everything out of the sides and i can get 56 in wide right under the window line and if its gonna be a wall then wont the specs be bigger cuz those specs are about what a big square box is in your cab and if you do a wall you will prolly build inside and take up as much room as possible besides were you put your amps if there in the cab

Edited December 30, 2011 by jakobebassbudds

[jakobebassbudds]

U am going to have my setup as a daily... i actually am going to wall it, thats why i'm going sub forward port forward... My truck is 3" traditional bodydropped so i loss sone airspace... A friend told me if i am going for a daily, i should have the port on top facing forward for best results. the max space that i have in my cab is 33.5h x 46w x 19d... i figured i have the depth of 17" for the box so i can drive comfortably.

shit im a big boy so im not going over 15 deep to be fully comfortable lol

Edited December 30, 2011 by jakobebassbudds

[nosho47]

The specs would be bigger... i can actually make the wall wedged because of my seat position but i figure that it would be easier to make a square wall instead...

Jako - is your truck with the third door? my amps will be in my bed.

Edited December 30, 2011 by nosho47

[Traks]

Yes with your style of dime a wall 50.5 will fit. But it will be tight!

[nosho47]

Is the 50.5 with the third door panel off?

[Traks]

It is not. I cannot find a pic with the wall in it. But heres a pic of a box that was in it that was 50.5 wide. And one that you can see the amount of plastic that was cut out.

[nosho47]

I finally got the chance to play around with the torres calculator a little more today... LMK what do you guys think of this? I think I'll try it at 6.35cu... I just hope this will sound good.