Socky Posted December 30, 2011 Report Posted December 30, 2011 I have a pyramid pab2300 600 watt 2 channel amp my buddy let me borrow, it was missing a fuse, and i put a little 10 amp fuse in just to see if it works and every it does, now i cant find the correct fuse size to put in it. He found it in his truck he bought without a fuse. Could somebody possible help me, amp was made in 1998 cant find any info about fuse on it. Jeep Cherokee 4dr -4.75 in front, new rusty's 4.5 in rear leafs -micky thompson 35x14.50x15 -locker rear -Rusty's offroad Engine/transmission/transfer case/crossmember/gas tank skid plates -Warn front bumper with 8000lb winch -Custom rear bumper -Warrior product tube doors (summertime) -Optima redtop (starter) -26XK miles and still runs like a bat out of hell Kenwood H/U 1/0 wire, 136 amp alt 200 ah batteries 12.7 daily 2 Apsm 1500 @ 2 ohm strapped on zv3 d1 with ns softparts Mb quart 125.4 wired to 4 aura 6's 3.6 cube box tuned to 36 plays down to 23hz
Socky Posted December 30, 2011 Author Report Posted December 30, 2011 that amp uses a 20 amp fuse. Thank you, i was almost thinking around a 30 amp, but wasnt sure, thought id ask before i try it. Jeep Cherokee 4dr -4.75 in front, new rusty's 4.5 in rear leafs -micky thompson 35x14.50x15 -locker rear -Rusty's offroad Engine/transmission/transfer case/crossmember/gas tank skid plates -Warn front bumper with 8000lb winch -Custom rear bumper -Warrior product tube doors (summertime) -Optima redtop (starter) -26XK miles and still runs like a bat out of hell Kenwood H/U 1/0 wire, 136 amp alt 200 ah batteries 12.7 daily 2 Apsm 1500 @ 2 ohm strapped on zv3 d1 with ns softparts Mb quart 125.4 wired to 4 aura 6's 3.6 cube box tuned to 36 plays down to 23hz
Recommended Posts
Archived
This topic is now archived and is closed to further replies.