blackandgoldl69 Posted January 4, 2012 Report Posted January 4, 2012 ok so i just got my ap-15001d amp today and before i even think about putting it in what electrical upgrades do i need so i dont mess this amp up. i alrady have the big 3 done and a run of knu 4guage wire from front to back. im gonna be hooking this up to my ap-tsvr 15's any help is greatly appreciated im still learning
ALPINE408 Posted January 4, 2012 Report Posted January 4, 2012 an extra batt and 1/0 wire your good Have you ever had your woofers blown?
blackandgoldl69 Posted January 4, 2012 Author Report Posted January 4, 2012 awesome thanks man can i run it at 1 ohm with an extra batt and 0 guage?
ALPINE408 Posted January 4, 2012 Report Posted January 4, 2012 awesome thanks man can i run it at 1 ohm with an extra batt and 0 guage? yup my buddie just got that amp ran 1/0 an extra batt in a honda civic with a stock alt and stock batt up front and only drops to 12.9 volts at 1 ohm Have you ever had your woofers blown?
blackandgoldl69 Posted January 4, 2012 Author Report Posted January 4, 2012 awesome thats all i needed to know thanks for the help
MrSkippyJ Posted January 5, 2012 Report Posted January 5, 2012 I have a RF1500bdcp with 4 gauge and no extra battery yet. I have never gone below 11.9 and that was only once. You should be more than ok with 0g and an extra battery F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69
Recommended Posts
Archived
This topic is now archived and is closed to further replies.